We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BTF-LIGHTING WS2812B5M60LB30E LED strip accessory 16.4ft 300 LED 60LED/m 5V IP30 90W

SKU CH-M7A1-DE32Y MPN WS2812B5M60LB30E

Individually addressable 16.4 ft RGB LED strip with 300 WS2812B ICs, 5 V DC, 90 W, IP30 rating and 3M adhesive backing

  • TypeLED Lighting
  • Watts90 watts
  • Size/Dimensions199.2 inches
  • Compatibility/FitmentWS2812B5M60LB30E, BTF-LIGHTING
  • Length199.2 inches
  • Base TypeStrip Lights
  • Individually addressable WS2812B ICs enable 24-bit colour and 256 brightness levels for dynamic effects
  • 300 LEDs on a 16.4 ft flexible strip cuttable every 50 cm for custom layouts
  • UL listed with 3M adhesive backing ensures safe, secure mounting on IP30 surfaces
  • Low-voltage 5 V operation keeps the strip hand-touchable during DIY projects
  • 90 W total draw at 60 LEDs per metre delivers bright multicolour output across 199.2 inches

What this strip is and who it is for

A 16.4ft WS2812B ECO RGB LED strip with 300 individually addressable 5050SMD pixels on a black 10mm PCB. Each LED contains its own WS2812B IC for 24-bit colour and 256 brightness levels, enabling chasing, rainbow and meteor effects. UL listed with 3M adhesive backing, it suits DIY lighting projects that need full pixel control at 5V.

What to check before ordering

The strip runs on DC5V and draws up to 90W, so a 5V10A supply is required; a 5V3A unit will not work. No controller or power supply is included. The IP30 version is non-waterproof and uses GRB colour order, not standard RGB. Cut points occur every 50cm at the solder joints for length adjustment.

Thermals, noise and power in normal use

Operating temperature range spans -20°C to 40°C with silent solid-state operation. At full white output the 90W load produces noticeable warmth along the 5m length; mounting on a metal surface helps dissipate heat. Power wires are separable from the data line to reduce voltage drop on long runs.

Highlights

  • Individually addressable WS2812B ICs enable 24-bit colour and 256 brightness levels for dynamic effects
  • 300 LEDs on a 16.4 ft flexible strip cuttable every 50 cm for custom layouts
  • UL listed with 3M adhesive backing ensures safe, secure mounting on IP30 surfaces
  • Low-voltage 5 V operation keeps the strip hand-touchable during DIY projects
  • 90 W total draw at 60 LEDs per metre delivers bright multicolour output across 199.2 inches

Specifications

TypeLED Lighting
BrandBTF-LIGHTING
ModelWS2812B5M60LB30E
Watts90 watts
Size/Dimensions199.2 inches
Compatibility/FitmentWS2812B5M60LB30E, BTF-LIGHTING
Length199.2 inches
Base TypeStrip Lights
Lamp ToneMulticolor, Black Ip30
CRISupport Lots of Controllers
Standards/Certificationshas_fcc_id: 2ATV8SP60XE
Energy Star QualifiedIndividually Addressable
Fixture TypeSilicone Rubber
FeaturesWS2812B RGB IC, Individually Addressable, Dream color, DIY Project, Support Lots of Controllers
Light ColorMulticolor
Parts1 Year
Labor1 Year
Part NumberWS2812B5M60LB30E

Questions about this item

Does the strip arrive with a power supply and controller, or must I buy them separately?

The 5 m roll ships with 3‑pin JST‑SM connectors and separate power wires already attached; no power supply or controller is included, so you will need to source a DC 5 V unit rated for at least 10 A.

What are the key differences between the IP30, IP65 and IP67 versions of this 16.4 ft 60 LED/m strip?

All three share 300 WS2812B ECO pixels on a 10 mm black PCB, but IP30 and IP65 include 3M adhesive tape while IP67 adds a 12 mm silicone sheath and requires mounting clips instead of tape.

What does the 90 W rating mean when the full 16.4 ft strip is powered at 5 V?

The 90 W figure represents total power draw when all 300 pixels run at full white; plan for a 5 V supply capable of 10 A or more and consider injecting power at both ends to keep voltage stable across the 5 m length.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.