Bryant
Bryant RS315W 15 A 120 V 3-way wall switch
15 A 120 V 3-way toggle switch with push-in and screw terminals, CSA certified and UL listed
- 15 A rating handles standard residential lighting loads
- 120 V AC operation matches common household circuits
- 3-way toggle enables control from two locations
- 7 in height fits standard electrical boxes
- CSA and UL certified for code-compliant installation
Bryant RS315W 15 A 120 V switch
The Bryant RS315W is a single-pole 3-way toggle switch rated for 15 A at 120 V AC. It is designed for residential lighting circuits that require control from two separate locations. The switch carries CSA certification and UL listing E3896 for code-compliant installations.
Thermoplastic housing with elongated strap
The white thermoplastic body features a hi-visibility yellow base and an elongated mounting strap for secure fit in standard wall boxes. Wiring options include both push-in and screw terminals on the back and side, allowing flexible conductor routing. The maintained toggle action stays in the selected position until manually changed.
Replaces worn 3-way toggles in 120 V lighting
This switch replaces aging or damaged 3-way toggles on 120 V residential circuits rated up to 15 A. The upgrade is worthwhile when the existing mechanism feels loose, fails to hold position, or shows discolouration from heat. It is not suited for circuits requiring a 4-way or dimmer function, nor for loads exceeding the 1/2 hp motor rating.
Highlights
- 15 A rating handles standard residential lighting loads
- 120 V AC operation matches common household circuits
- 3-way toggle enables control from two locations
- 7 in height fits standard electrical boxes
- CSA and UL certified for code-compliant installation
Specifications
| Brand | BRYANT |
|---|
Questions about this item
What does the 120 V AC rating mean for circuit compatibility?
The switch is rated for 120 V AC residential circuits and carries UL E3896 and CSA certification for that voltage.
What wall-box depth does the 1.7 in. overall height require?
The 1.7 in. height fits standard North American switch boxes; the elongated strap adds mounting flexibility for deeper or misaligned boxes.
How do I use the push-in and screw terminals together without a loose connection?
Strip wire to the gauge marked on the device, push solid wire fully into the back entries, then tighten the side screws on the same conductors for a secure dual connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
