Bryant
Bryant BRY8300RED Straight Blade Receptacle 5-20R 20A 125V AC 2 Pole 3 Wire Red
A straight-blade duplex receptacle rated 20 A at 125 V AC with screw terminals for back or side wiring
- TypeWiring Devices
- 20 A rated for heavy-duty circuits
- 125 V AC standard household voltage
- Red housing for quick visual identification
- UL Listed and CSA Certified safety compliance
- Back and side wiring for flexible installation
Bryant BRY8300RED 20 A Duplex Receptacle
The Bryant BRY8300RED is a 20 A, 125 V AC straight-blade duplex receptacle with a NEMA 5-20R configuration. It is built for commercial or residential circuits that require a grounded, polarised 2-pole, 3-wire outlet. The red composite housing provides quick visual identification for dedicated or emergency branch circuits.
Verify Circuit Rating and Wiring Method
Confirm the branch circuit is protected by a 20 A breaker and uses conductors rated for 20 A service. The device accepts back-wiring and side-wiring via screw terminals, so ensure your box has sufficient depth for the chosen wiring method. This receptacle is not GFCI or AFCI protected and must not be used where those protections are required by code.
Red Composite Housing Aids Circuit Identification
The red colour allows electricians and maintenance staff to distinguish this outlet from standard receptacles at a glance. UL Listed and CSA Certified markings confirm compliance with North American safety standards. No cover plate is included, so a compatible 1-gang cover must be sourced separately.
Highlights
- 20 A rated for heavy-duty circuits
- 125 V AC standard household voltage
- Red housing for quick visual identification
- UL Listed and CSA Certified safety compliance
- Back and side wiring for flexible installation
Specifications
| Brand | BRYANT |
|---|---|
| Type | Wiring Devices |
Questions about this item
Does the BRY8300RED receptacle include a cover plate or must one be purchased separately?
The unit ships without a cover; a standard single-gang cover plate must be bought separately.
Which NEMA configuration should I select for a 20 A 125 V circuit?
Choose the 5-20R configuration, rated for 20 A at 125 V AC, 2-pole, 3-wire grounded service.
What does the 20 A rating mean when the receptacle is installed in a real circuit?
It supports continuous loads up to 20 A on a properly protected 125 V branch circuit with screw-terminal back or side wiring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



