We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange flush-mount duplex receptacle with isolated ground marking

Bryant

Bryant BRY8300IG 20 A 125V AC 5-20R isolated ground receptacle

SKU CH-3Y50-HHSTX

20 A 125 V AC isolated-ground duplex receptacle with impact-resistant composite housing, CSA certified and UL listed

  • TypeWiring Devices
  • Isolated ground protects sensitive equipment
  • 20 A 125V AC rating handles heavy loads
  • Impact-resistant composite housing withstands job-site abuse
  • UL Listed and CSA Certified for code compliance
  • Flush-mount duplex design fits standard single-gang boxes

20 A 125 V isolated ground receptacle

The Bryant BRY8300IG is a 20-ampere, 125-volt AC duplex receptacle with an isolated ground. It uses a straight-blade 5-20R configuration rated for two poles and three wires. The composite housing is orange, impact-resistant, and designed for flush mounting without a cover.

For circuits needing a dedicated ground path

This device suits installations where sensitive equipment requires a ground isolated from the building conduit system. It is not for circuits that require ground-fault circuit-interrupter protection. Buyers needing a GFCI device or a non-isolated standard ground should look at a different receptacle type.

Isolated ground with 5-20R NEMA configuration

The defining specification is the isolated ground combined with the NEMA 5-20R layout. This arrangement provides a dedicated equipment ground separate from the enclosure ground while accepting standard 20-ampere plugs. Verify that the wiring plan calls for an isolated-ground circuit before selecting this part.

Highlights

  • Isolated ground protects sensitive equipment
  • 20 A 125V AC rating handles heavy loads
  • Impact-resistant composite housing withstands job-site abuse
  • UL Listed and CSA Certified for code compliance
  • Flush-mount duplex design fits standard single-gang boxes

Specifications

BrandBRYANT
TypeWiring Devices

Questions about this item

How can I confirm the Bryant BRY8300IG 20 A 125V AC 5-20R isolated ground receptacle is working correctly after installation?

Verify the orange housing is securely flush-mounted, then use a circuit tester on the 5-20R slots to confirm 125V AC power and proper isolated ground continuity.

What is included with the Bryant BRY8300IG receptacle and what must be purchased separately?

The box contains the single-gang duplex receptacle with screw terminals; a wall plate, mounting screws and wire connectors are not included and must be bought separately.

Which version of the Bryant BRY8300IG should I choose for a 20-amp isolated-ground circuit?

The BRY8300IG is the only model listed and matches a 20 A, 125V AC, 5-20R, 2-pole 3-wire isolated-ground requirement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.