We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and white nylon straight blade connector with screw terminals

Bryant

Bryant BRY5369NC Straight Blade Connector 5-20R 20A 125V AC 2 Pole 3 Wire

SKU CH-VC1J-69NT4

Industrial straight-blade connector rated 20 A, 125 V AC with screw terminals for 10 AWG cable from 0.25 to 0.66 in diameter

  • TypeStraight Blade Devices
  • Size/Dimensions0.245" to 0.655"
  • Rated for 20 A at 125 V AC industrial loads
  • NEMA 5-20R configuration accepts standard 2-pole 3-wire plugs
  • Screw terminals secure up to 10 AWG conductors
  • Nylon housing resists chemicals and impact in commercial settings
  • Accepts cable diameters from .25 in to .66 in

Straight Blade Connector 5-20R 20 A

This Bryant straight blade connector handles 20 A at 125 V AC. It uses a 5-20R NEMA configuration with two poles and three wires. The nylon housing provides chemical and impact resistance. Screw terminals accept up to 10 AWG conductors.

Industrial grade for commercial wiring

Suited for electricians and maintenance teams needing a grounded, single-phase connector in industrial or commercial settings. The cable range spans 0.25 in to 0.66 in diameter. Not intended for installations that require an IP-rated enclosure or a different NEMA pin layout.

Cable diameter range 0.25 in to 0.66 in

The connector accommodates cables from 0.25 in minimum to 0.66 in maximum diameter. Verify your cable outer dimension falls within this window before purchase. The screw-terminal wire size limit is 10 AWG maximum.

Highlights

  • Rated for 20 A at 125 V AC industrial loads
  • NEMA 5-20R configuration accepts standard 2-pole 3-wire plugs
  • Screw terminals secure up to 10 AWG conductors
  • Nylon housing resists chemicals and impact in commercial settings
  • Accepts cable diameters from .25 in to .66 in

Specifications

BrandBRYANT
TypeStraight Blade Devices
Size/Dimensions0.245" to 0.655"

Questions about this item

Does the Bryant BRY5369NC generate noticeable heat when carrying a continuous 20 A load?

The connector uses screw terminals rated for 10 AWG conductors, which keeps resistance low so heat rise stays minimal during full-load operation.

What cable diameter range must I already have for the Bryant BRY5369NC to clamp securely?

The housing accepts cables from .25 in to .66 in outer diameter, covering the .245 in to .655 in spec range.

Will the Bryant BRY5369NC fit an existing 5-20R receptacle in my older panel?

Yes, it follows the standard NEMA 5-20R configuration with 2 poles and 3 wires, matching legacy 125V AC grounded outlets.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.