Bryant
Bryant 9801W Rocker Wall Switch 15 A 2 hp White
A 15 A single-pole rocker switch rated for 2 hp at 120/277V AC with screw terminals and back or side wiring
- Reliable 15 A switching for 120/277 V AC circuits
- 2 hp motor rating handles heavier industrial loads
- Rocker action with stainless steel spring wire for positive feel
- UL/CSA listed for code-compliant installations
- Compact 1.7 in height fits standard wall boxes
Bryant 9801W Rocker Wall Switch
The Bryant 9801W is a single-pole rocker wall switch rated for 15 A at 120/277V AC with a 2 hp motor rating. It is built for industrial and commercial lighting or motor control where a maintained on-off action is required. The white rocker provides clear visual status in panel or wall-box installations. Wiring options include back and side entry with screw terminals.
Sustained load performance
The switch uses a stainless-steel spring wire mechanism designed to maintain consistent contact force over repeated cycles. UL and CSA listing confirms it meets safety standards for continuous operation at the rated 15 A and 2 hp. The maintained function keeps the circuit closed without operator pressure, reducing wear from momentary actuation. Screw-terminal connections resist loosening under thermal cycling.
Installation checklist
Verify the supply voltage matches the 120/277V AC rating before wiring. Confirm the box depth accommodates the 1.7 in overall height and allows space for back or side wiring. Ensure the circuit breaker or fuse protects the 15 A rating and the connected load does not exceed 2 hp. The device is single-pole only; it cannot control a circuit from two locations.
Highlights
- Reliable 15 A switching for 120/277 V AC circuits
- 2 hp motor rating handles heavier industrial loads
- Rocker action with stainless steel spring wire for positive feel
- UL/CSA listed for code-compliant installations
- Compact 1.7 in height fits standard wall boxes
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
Does the 9801W rocker switch generate noticeable heat when left on all day at its 15 A rating?
The switch is rated for continuous 15 A at 120/277 V AC and uses a stainless-steel spring mechanism designed for industrial duty, so normal operation produces minimal heat.
What wiring must already be in the box for the 9801W to install correctly?
You need 120/277 V AC supply conductors and a ground; the switch accepts back-wire or side-wire connections secured by screw terminals.
Will the 9801W fit in a standard wall box alongside older toggle switches?
Yes, its single-pole rocker body measures 1.7 in. overall height and mounts in a standard switch box, aligning with existing devices.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
