Bryant
Bryant 8300HBWL Straight Blade Receptacle 5-20R 20A 125V AC 2 Pole 3 Wire
A 20 A, 125 V AC duplex receptacle with a straight-blade 5-20R configuration, impact-resistant nylon housing, and CSA, UL 498, and federal-spec compliance
- TypeWiring Devices
- 20 A current rating for high-demand circuits
- 125 V AC voltage rating for standard residential power
- Impact-resistant nylon housing withstands rough handling
- CSA C22.2 and UL 498 certified for code compliance
- NEMA 5-20R duplex configuration accepts two plugs
Bryant 8300HBWL Duplex Receptacle
This Bryant 8300HBWL is a straight-blade duplex receptacle rated 20 A at 125 V AC with a NEMA 5-20R configuration. It provides two grounded outlets in a single-gang white nylon housing designed for flush mounting. The impact-resistant body meets UL 498, CSA C22.2, NEMA WD-6 and Federal Specification W-C-596.
Who this suits and who should look elsewhere
The device suits electricians and facility managers wiring 20 A branch circuits in commercial or residential locations that require a standard duplex outlet. It is not for circuits needing GFCI protection, tamper-resistant shutters, weather-resistant covers or locking-blade connectors. Installers needing isolated-ground, hospital-grade or higher-amperage receptacles must select a different model.
The specification that decides fit
The NEMA 5-20R configuration and 20 A / 125 V AC rating are the decisive specifications; the receptacle must match the circuit breaker rating and the plug type used on the connected equipment.
Highlights
- 20 A current rating for high-demand circuits
- 125 V AC voltage rating for standard residential power
- Impact-resistant nylon housing withstands rough handling
- CSA C22.2 and UL 498 certified for code compliance
- NEMA 5-20R duplex configuration accepts two plugs
Specifications
| Brand | BRYANT |
|---|---|
| Type | Wiring Devices |
Questions about this item
What does the NEMA 5-20R configuration support in practice?
The NEMA 5-20R configuration supports 20 A at 125V AC with two poles and three wires for grounded, polarised duplex connections.
What are the physical mounting requirements for this receptacle?
It mounts flush in a single-gang box and has a white nylon housing that is impact resistant.
How is the receptacle wired, and what step is often missed?
Connect the three wires to the two poles and ground terminal; the step often missed is confirming the circuit matches the 20 A rating before energising.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



