We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and white nylon midget locking plug with three straight blades

Bryant

Bryant 7485NP 15A 125/250VAC ML-3P Black/White straight blade plug

SKU CH-JFRA-3V6QY

15 A midget locking plug with 3 poles, 3 wires, 125/250 V AC rating and nylon body for cord sizes .281–.625 in

  • ColorBlack/White
  • MaterialHAWA
  • TypeTraffic & Parking Lot
  • Rated for 15 A at 125/250 V AC
  • Meets NEMA WD1, WD5 and UL 498 standards
  • Nylon body resists impact and heat
  • Accepts cord diameters from .281 in to .625 in
  • Midget locking design ensures secure connection

Bryant 7485NP locking plug

This Bryant 7485NP is a 15 A midget locking plug rated for 125/250 V AC. It uses a NEMA ML-3P configuration with three poles and three wires. The plug suits installers who need a compact, twist-lock connection for lighting or equipment circuits.

Thermals noise and power draw

The nylon body meets UL 498 and NEMA WD1 and WD5 standards for safe operation at the rated current. Normal use produces no audible noise and the device adds no measurable power draw beyond the connected load. Heat rise stays within the limits defined by the referenced standards.

Build quality and daily use

The black and white nylon housing resists impact and chemicals in traffic and parking-lot environments. Cord diameters from .281 in to .625 in are accepted, so installers can match common cable sizes without adapters. The twist-lock action secures the plug against vibration and accidental disconnection.

Highlights

  • Rated for 15 A at 125/250 V AC
  • Meets NEMA WD1, WD5 and UL 498 standards
  • Nylon body resists impact and heat
  • Accepts cord diameters from .281 in to .625 in
  • Midget locking design ensures secure connection

Specifications

BrandBryant
ColorBlack/White
MaterialHAWA
TypeTraffic & Parking Lot

Questions about this item

How do I wire the Bryant 7485NP midget locking plug and what is the common mistake?

Strip conductors to the length shown in the wiring diagram, insert each into its marked terminal, and tighten the terminal screws securely; the step most often missed is verifying the cord outer diameter is between .281 in and .625 in so the strain-relief clamp actually grips the jacket.

What maintenance or replacement will the Bryant 7485NP plug need over time?

Inspect the nylon body and terminals periodically for heat discoloration, cracking, or corrosion; replace the plug if the locking action feels loose, the blades show pitting, or the cord grip no longer holds the cable firmly.

What is the first limit reached when the Bryant 7485NP plug runs at full load continuously?

The 15 A rating is the primary limit; sustained current above 15 A will overheat the nylon housing and terminals, so the circuit must stay at or below 15 A at 125/250 V AC.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.