We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow weatherproof boot, short L shape, composite elastomer finish

Bryant

Bryant 72002BC Weatherproof Boot Short L Yellow

SKU CH-AV8Z-5XSWJ

A weatherproof boot rated for 20 A and 30 A locking connectors, heat, oil and grease resistant, CSA, NOM and UL listed, yellow composite elastomer

  • TypeWiring Devices
  • ColorYellow
  • Weatherproof protection for indoor locking connectors
  • Rated for 20 A and 30 A current loads
  • Heat, oil, grease and weather resistant material
  • CSA certified, NOM approved and UL listed safety
  • Six-inch composite elastomer boot in high-visibility yellow

Bryant 72002BC Weatherproof Boot

The Bryant 72002BC is a yellow weatherproof boot designed for indoor use with locking connectors rated at 20 A or 30 A. It suits electricians and facility managers who need reliable environmental sealing on composite-elastomer wiring devices. The CSA-certified, UL-listed accessory meets NOM standards for heat, oil, grease and weather resistance. It is not for buyers who require outdoor-rated enclosures or non-locking connector compatibility.

Installation and common issues

The boot slides over the connector body and seats against the device face to form the weather seal. Correct alignment of the locking tabs is essential; misalignment prevents the connector from latching fully and compromises the resistant barrier. Over-stretching the composite elastomer during fitting can tear the material and reduce heat-resistant performance. No tools are required, but installers should verify the connector rating matches the 20 A or 30 A specification before proceeding.

Decisive specification

The decisive specification is the 20 A and 30 A current compatibility combined with CSA, UL and NOM certifications for heat, oil, grease and weather resistance. This rating determines whether the boot matches the locking connector in the circuit. Buyers needing different amperage ratings or outdoor-location certification must select an alternative part.

Highlights

  • Weatherproof protection for indoor locking connectors
  • Rated for 20 A and 30 A current loads
  • Heat, oil, grease and weather resistant material
  • CSA certified, NOM approved and UL listed safety
  • Six-inch composite elastomer boot in high-visibility yellow

Specifications

BrandBRYANT
TypeWiring Devices
ColorYellow

Questions about this item

How can I confirm the boot is seated correctly after installation?

The boot should fully cover the locking connector with no gaps; its composite elastomer body will compress slightly and stay flexible in heat or cold, indicating a proper weather-resistant seal.

What comes in the package and what must I supply?

The package contains only the yellow weatherproof boot; you must provide a compatible 20 A or 30 A locking connector and any mounting hardware required for your enclosure.

Which version suits a standard 20 A locking connector?

This single model 72002BC is rated for both 20 A and 30 A devices, so one boot works for either amperage without needing a different variant.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.