Bryant
Bryant 4821I Ivory Toggle Switch 15A 120/277V
Ivory single-pole toggle switch rated 15 A at 120/277 V AC with 2 hp motor capacity and screw-terminal wiring
- Ivory toggle suits clean residential aesthetics
- 15 A rating handles standard lighting circuits
- 120/277 V AC works in home and commercial panels
- Back and side wiring gives installation flexibility
- 7 in height fits shallow wall boxes
Industrial Toggle Switch
The Bryant 4821I is a single-pole, double-throw toggle switch rated at 15 amps and 120/277 volts AC. It suits industrial control panels and machinery circuits that need a momentary contact action. The ivory finish matches standard enclosure colours. Electricians and maintenance crews will find it fits typical back- and side-wired boxes.
Capacity and Headroom
The switch carries a 2 horsepower motor load at its rated voltage, giving headroom for small industrial motors and lighting contactors. It runs out beyond 15 amps continuous or when a maintained on-off action is required instead of momentary. The screw terminals accept solid or stranded conductors for secure termination.
Wiring Flexibility
Back and side wiring options let installers choose the most convenient cable entry without extra adapters. UL, CSA and NOM markings confirm the device meets North American safety standards for industrial use. The 1.7 inch overall height keeps the profile low inside crowded enclosures. No locking feature is included, so the toggle remains free to operate.
Highlights
- Ivory toggle suits clean residential aesthetics
- 15 A rating handles standard lighting circuits
- 120/277 V AC works in home and commercial panels
- Back and side wiring gives installation flexibility
- 7 in height fits shallow wall boxes
Specifications
| Brand | BRYANT |
|---|
Questions about this item
Will this 15 A toggle switch work on the same 120/277 V circuit as my existing Bryant 4821 hardware?
Yes, the switch is rated for 15 A at 120/277 V AC, matching the voltage and current of the existing Bryant 4821 devices on that circuit.
How can I confirm the momentary toggle action is functioning correctly after wiring?
Press the toggle; the circuit should close only while the lever is held and open immediately when released, confirming the momentary single-pole/double-throw operation.
Does the 4821I include mounting screws and wire connectors, or must I buy them separately?
The switch uses screw terminals for back or side wiring; mounting screws and wire connectors are not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
