We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver SFP transceiver with an RJ45 port and side label

Brute Networks

Brute Networks SFP-TX 10/100/1000BASE-T 100m SFP transceiver

SKU CH-A5J3-0VF2F

Copper SFP transceiver delivers 10/100/1000 Mbps over RJ45 up to 100 metres

  • Device TypeTransceiver
  • StandardsRJ45
  • Ports10/100/1000Base-T
  • Max Distance100m
  • Transfer Rate1 Gbps
  • LEDsPower, Link/Activity, Full-Duplex, and Speed
  • 100m copper reach for standard Ethernet runs
  • Auto-negotiates 10/100/1000 Mbps on a single RJ45 port
  • Operates reliably from 0°C to 70°C in commercial environments
  • MSA-compliant design fits any SFP slot without proprietary lock-in
  • Third-party module tested for full Aruba Networks compatibility

Copper SFP for 1 Gbps RJ45 links

This transceiver provides a single RJ45 port that negotiates at 10, 100 or 1000 Mbps over standard twisted-pair copper. It is built to the SFP multi-source agreement and coded for full Aruba Networks compatibility. Network engineers use it to add copper uplinks to switches that only accept SFP modules.

Suits copper uplinks in Aruba switches

The module operates from 0 to 70 C and draws power directly from the host port, so it fits existing switch bays without extra cabling. It is not intended for fibre links, for reaches beyond 100 m or for platforms that require digital diagnostic monitoring.

100 m reach over Cat5e or better

The 1000BASE-T interface guarantees a 100 m link when used with Cat5e or higher-grade cable. This distance limit is the decisive specification when planning cabinet-to-cabinet or floor-to-floor copper runs.

Highlights

  • 100m copper reach for standard Ethernet runs
  • Auto-negotiates 10/100/1000 Mbps on a single RJ45 port
  • Operates reliably from 0°C to 70°C in commercial environments
  • MSA-compliant design fits any SFP slot without proprietary lock-in
  • Third-party module tested for full Aruba Networks compatibility

Specifications

BrandAruba Networks
ModelSFP-TX
Device TypeTransceiver
StandardsRJ45
Ports10/100/1000Base-T
Max Distance100m
Transfer Rate1 Gbps
LEDsPower, Link/Activity, Full-Duplex, and Speed
Temperature0? ~ 70? C
Weight2 oz.
DisclaimerThird Party product. Part number SFP-TX is property of Aruba Networks.

Questions about this item

What type of switch port is required to install this SFP transceiver?

The module fits any standard SFP slot that accepts 10/100/1000BASE-T copper transceivers and uses an RJ45 connector for the network cable.

Will this transceiver negotiate down to 10 or 100 Mbps if the connected device only supports slower speeds?

Yes, the 10/100/1000BASE-T interface auto-negotiates to 10, 100 or 1000 Mbps depending on the link partner.

Which front-panel LEDs confirm the link is operating at gigabit speed and full duplex?

The Speed LED lights for 1000 Mbps and the Full-Duplex LED lights when the link is running in full-duplex mode.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.