We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular QSFP+ transceiver module with light-coloured metal housing and MTP/MPO connector port

Brute Networks

Brute Networks 40GBASE-SR4 150m 850nm QSFP+ transceiver

SKU CH-BCRR-G7Q96

A 40 Gbps QSFP+ transceiver for 150 m multi-mode links at 850 nm with MTP/MPO connector and digital monitoring

  • Device TypeTransceiver
  • StandardsMMF
  • Wavelength850nm
  • Fiber CableMulti-mode Optical Fiber
  • Ports40GBase-SR4
  • Max Distance150m
  • 150m reach over multi-mode fibre at 850nm wavelength
  • 40 Gbps throughput via QSFP+ form factor with MTP/MPO connector
  • 100% HPE JG325B compatible for drop-in deployment
  • Commercial temperature range 0 to 70 Celsius
  • MSA compliant with digital diagnostic monitoring enabled

40GBASE-SR4 QSFP+ transceiver for HPE networks

This 40 Gbps transceiver targets network engineers expanding 40G links on HPE switches or routers. It operates at 850 nm over multi-mode fibre with a 150 m reach, matching the JG325B part. The module is MSA compliant and coded for 100 percent HPE compatibility.

Hot-plug QSFP+ with MTP/MPO connector

The QSFP+ form factor allows hot insertion into any compatible cage without tools or power-down. A keyed MTP/MPO connector ensures correct fibre polarity on the first attempt. Digital output monitoring is supported, so link health is visible immediately. The most common issue is mismatched fibre polarity or dirty end-faces, which the keyed connector and standard cleaning procedures prevent.

Commercial temperature rating for sustained

Rated for 0 to 70 °C, the transceiver maintains full 40 Gbps line rate continuously across the 150 m span. MSA-compliant laser strength and firmware keep bit-error rates low during prolonged loads. Power, link, activity, full-duplex and speed LEDs give real-time status without interrupting traffic.

Highlights

  • 150m reach over multi-mode fibre at 850nm wavelength
  • 40 Gbps throughput via QSFP+ form factor with MTP/MPO connector
  • 100% HPE JG325B compatible for drop-in deployment
  • Commercial temperature range 0 to 70 Celsius
  • MSA compliant with digital diagnostic monitoring enabled

Specifications

BrandHPE
Model40GBASE-SR4
Device TypeTransceiver
StandardsMMF
Wavelength850nm
Fiber CableMulti-mode Optical Fiber
Ports40GBase-SR4
Max Distance150m
Transfer Rate40 Gbps
LEDsPower, Link/Activity, Full-Duplex, and Speed
Temperature0? ~ 70? C
Weight2 oz.
DisclaimerThird Party product. Part number 40GBASE-SR4 is property of HPE.

Questions about this item

How do I confirm the transceiver is operating correctly after installation?

Check the Power, Link/Activity, Full-Duplex and Speed LEDs on the module faceplate; a solid Power light and active Link/Activity indicate normal operation at 40 Gbps.

What ships with the module and what must I source separately?

The QSFP+ transceiver with MTP/MPO connector is supplied; you must provide OM3 or OM4 multi-mode patch cables and ensure the host switch has a free QSFP+ cage.

Which reach and wavelength variant matches a 150-metre 850 nm link?

This model is the 40GBASE-SR4 150m 850nm version, designed for multi-mode fibre runs up to 150 metres at 850 nm wavelength.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.