We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact SFP+ transceiver module, matte metal finish, single LC port, branded Brute Networks

Brute Networks

Brute Networks 10GBase-LR 10km 1310nm SFP+ Transceiver

SKU CH-6WH0-YB6YP

A 10 Gbps SFP+ transceiver for 10 km single-mode links at 1310 nm with LC connector

  • Device TypeTransceiver
  • StandardsSMF
  • Wavelength1310nm
  • Fiber CableSingle-mode Optical Fiber
  • ProtocolsHCRP, SPP
  • Ports10GBase-LR
  • 10 Gbps throughput with 10km single-mode reach
  • 1310 nm wavelength suited for long-range links
  • 100 % compatible with HP 455886-B21 equipment
  • Operates from 0 to 70 °C commercial range
  • LC duplex connector fits standard SFP+ cages

10km SFP+ Transceiver for 10GbE Links

The Brute Networks 10GBase-LR module delivers 10 Gbps over single-mode fibre up to 10km using a 1310nm wavelength. It fits any SFP+ port that accepts the 455886-B21 form factor and operates across a 0–70 °C commercial temperature range. LEDs show power, link activity, full-duplex status and speed at a glance.

Replaces Short-Range or Copper Uplinks

Swap this in when existing SR optics or direct-attach cables cannot span the required distance. The 10km reach covers campus, metro or data-centre interconnects where multi-mode fibre falls short. The upgrade is worth it whenever link budgets demand long-haul single-mode performance without moving to heavier form factors.

Verify LC Duplex Ports and Single-Mode Fibre

Confirm the host equipment provides LC duplex receptacles and that the installed cabling is single-mode rated for 1310nm operation. Check that the switch or router firmware recognises third-party SFP+ modules compliant with MSA standards. Ensure the chassis can accommodate the 0.5" × 0.5" × 2.2" footprint and 0.04 lb weight per module.

Highlights

  • 10 Gbps throughput with 10km single-mode reach
  • 1310 nm wavelength suited for long-range links
  • 100 % compatible with HP 455886-B21 equipment
  • Operates from 0 to 70 °C commercial range
  • LC duplex connector fits standard SFP+ cages

Specifications

BrandHP
Model455886-B21
Device TypeTransceiver
StandardsSMF
Wavelength1310nm
Fiber CableSingle-mode Optical Fiber
ProtocolsHCRP, SPP
Ports10GBase-LR
Max Distance10km
Transfer Rate10 Gbps
LEDsPower, Link/Activity, Full-Duplex, and Speed
Temperature0� ~ 70� C
Weight2 oz.
DisclaimerThird Party product. Part number 455886-B21 is property of HP.

Questions about this item

What LC single-mode patch cable and SFP+ port spacing does the 1310nm 10km transceiver require?

It uses a duplex LC connector on standard single-mode fiber and fits any SFP+ cage with 0.5 inch width and 2.2 inch depth clearance.

Which orientation and latch step do installers often miss when seating this SFP+ module?

Insert the module label-side up until the bail latch clicks; the latch must be closed before pushing the module fully home or the link will not come up.

How do I know when the 1310nm laser on this 10GBase-LR unit needs replacement?

Monitor the Link/Activity and Power LEDs — loss of light or frequent link drops after cleaning the LC faces signals the laser is degrading.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.