We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver XFP transceiver module with LC duplex port and pull-tab release

Brute Networks

Brute Networks 10G-XFP-SR 10GBase-SR 850nm 300m XFP transceiver

SKU CH-EQ4K-BC6EV

A 10 Gbps XFP transceiver for multi-mode fibre at 850 nm reaching 300 m, Brocade-compatible and rated 0–70 °C

  • Device TypeTransceiver
  • StandardsMMF
  • Wavelength850nm
  • Fiber CableMulti-mode Optical Fiber
  • Ports10GBase-SR
  • Max Distance300m
  • 10 Gbps transfer rate over multi-mode fibre
  • 300 m reach at 850 nm wavelength
  • 100 % compatible with Brocade 10G-XFP-SR
  • Operates from 0 °C to 70 °C commercial range
  • Meets or exceeds MSA industry standards

10 Gbps 850 nm XFP Transceiver

This Brute Networks 10G-XFP-SR module delivers 10 Gbps over multi-mode fibre at an 850 nm wavelength with a reach of 300 m. It targets network engineers upgrading Brocade or Foundry FastIron Edge X424 and X448 switches. The plug-in transceiver uses an LC multi-mode interface and meets MSA industry standards for interoperability. Third-party construction provides a cost-effective alternative to original equipment optics.

Verify XFP slot and multi-mode fibre plant

Confirm the host switch has an available XFP cage and that existing patch cords are multi-mode LC duplex rated for 850 nm operation. The link budget supports 300 m or 980 ft; longer runs will require different optics. Operating temperature spans 0 to 70 °C, so ensure cabinet airflow keeps the module within this range. No additional software licensing is mentioned for basic connectivity.

Hot-pluggable LC module with status LEDs

The transceiver weighs 2 oz and follows the standard XFP form factor for tool-less insertion and removal. Front-panel LEDs indicate power, link activity, full-duplex state and speed, giving immediate visual feedback during installation and troubleshooting. LC connectors latch securely but release with a simple squeeze, simplifying routine cable changes. Brocade-compatible coding avoids vendor lock-out alarms on supported platforms.

Highlights

  • 10 Gbps transfer rate over multi-mode fibre
  • 300 m reach at 850 nm wavelength
  • 100 % compatible with Brocade 10G-XFP-SR
  • Operates from 0 °C to 70 °C commercial range
  • Meets or exceeds MSA industry standards

Specifications

BrandBrocade
Model10G-XFP-SR
Device TypeTransceiver
StandardsMMF
Wavelength850nm
Fiber CableMulti-mode Optical Fiber
Ports10GBase-SR
Max Distance300m
Transfer Rate10 Gbps
LEDsPower, Link/Activity, Full-Duplex, and Speed
Temperature0? ~ 70? C
Weight2 oz.
DisclaimerThird Party product. Part number 10G-XFP-SR is property of Brocade.

Questions about this item

Does the Brute Networks 10G-XFP-SR come with a fibre patch cable or must I buy an LC multi-mode cable separately?

The module has an LC multi-mode interface; a compatible multi-mode fibre patch cable is not included and must be purchased separately.

Should I choose the 850 nm 300 m version or is there a longer-reach option in this same model line?

This model is specified for 850 nm with a maximum reach of 300 m over multi-mode fibre; no other reach or wavelength variant is listed for this part.

What does the 10 Gbps transfer rate mean when the transceiver is installed in a Foundry FastIron Edge X424 or X448 switch?

It provides a 10 Gigabit Ethernet link up to 300 m over multi-mode fibre at 850 nm, operating within the commercial temperature range of 0 to 70 °C.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.