We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver SFP+ transceiver module with an RJ45 port and side label

Brute Networks

Brute Networks 10G-SFPP-T 10/100/1000BASE-T 30m SFP+ transceiver

SKU CH-V76B-74JBX

Copper SFP+ transceiver delivering 1 Gbps over RJ45 up to 30 m with 0–70 °C commercial rating

  • Device TypeTransceiver
  • StandardsRJ45
  • Ports10/100/1000Base-T
  • Max Distance30m
  • Transfer Rate1 Gbps
  • LEDsPower, Link/Activity, Full-Duplex, and Speed
  • 30 m copper reach via RJ45 connector
  • 10/100/1000 Mbps auto-negotiation on a single port
  • Commercial 0–70 °C operating range
  • Digital diagnostics monitoring built in
  • MSA-compliant design for Brocade compatibility

Copper SFP+ for Brocade gear

This transceiver plugs into an SFP+ cage and presents an RJ45 port that negotiates at 10, 100 or 1000 Mbps over copper twisted-pair. It is built for network engineers who need a short copper uplink on Brocade switches or routers without running fibre.

Replaces fibre modules for short runs

When a link stays within 30 metres and the far end also has an RJ45 port, this module removes the need for patch cords, patch panels and separate media converters. The jump is worth it when cabinet density or cabling cost makes copper simpler than OM3 or single-mode fibre.

Hot-plug install with standard RJ45

Insert the module while the switch is powered on, then connect a Cat5e or better patch cord to the RJ45 jack. The main pitfalls are exceeding the 30 metre reach, using cable below Cat5e quality, or plugging into a port that does not support 1000BASE-T negotiation.

Highlights

  • 30 m copper reach via RJ45 connector
  • 10/100/1000 Mbps auto-negotiation on a single port
  • Commercial 0–70 °C operating range
  • Digital diagnostics monitoring built in
  • MSA-compliant design for Brocade compatibility

Specifications

BrandBrocade
Model10G-SFPP-T
Device TypeTransceiver
StandardsRJ45
Ports10/100/1000Base-T
Max Distance30m
Transfer Rate1 Gbps
LEDsPower, Link/Activity, Full-Duplex, and Speed
Temperature0? ~ 70? C
Weight2 oz.
DisclaimerThird Party product. Part number 10G-SFPP-T is property of Brocade.

Questions about this item

Will the RJ45 connector on this SFP+ transceiver fit a standard 10/100/1000Base-T switch port?

Yes, the module uses an RJ45 connector that plugs directly into any standard 10/100/1000Base-T port supporting SFP+ form factor.

What is the correct way to insert the transceiver so the latch engages without damaging the port?

Align the module with the cage, slide it in until you feel a firm click, then pull gently to confirm the latch is seated before connecting the copper cable.

How do I know when the transceiver needs replacement if the link LEDs show power and activity?

Monitor the digital optical monitoring data for rising temperature or voltage alarms; persistent errors above 70 °C or link drops at 30 m indicate the module should be swapped.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.