We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Broadcom MegaRAID 9540 RAID controller card green PCB gold edge connector

Broadcom

Broadcom 05-50148-00 MegaRAID 9540 RAID controller

SKU CH-ZAMH-SFDDV MPN 05-50148-00

PCIe 4.0 RAID boot adapter supports NVMe and SATA drives with RAID 0, 1 and hardware secure boot

  • RAID 0 and 1 protect boot data
  • PCIe 4.0 link delivers high bandwidth for critical apps
  • Hardware secure boot strengthens system security
  • 12 Gb/s NVMe and SATA support fast storage
  • Drive activity LED shows real-time status

Broadcom MegaRAID 9540-2M2 Boot Adapter

The Broadcom MegaRAID 9540-2M2 is a PCIe 4.0 controller that adds hardware RAID 0 and 1 to NVMe and SATA drives. It serves as a bootable storage adapter for servers that need redundancy without a full RAID card. The board uses a 12Gb/s link and supports hardware secure boot for platform integrity.

Suited for single or mirrored boot volumes

This adapter fits administrators who want a dedicated RAID 0 or 1 volume for the operating system. It is not for arrays that require parity or striped parity levels. It is not for systems that lack a PCIe 4.0 slot or that need more than two drives on this controller.

PCIe 4.0 x8 interface

The card connects through a PCIe 4.0 x8 edge connector and drives two devices at 12Gb/s each. This bandwidth and port count decide whether the adapter matches the server backplane and the drive types in use.

Highlights

  • RAID 0 and 1 protect boot data
  • PCIe 4.0 link delivers high bandwidth for critical apps
  • Hardware secure boot strengthens system security
  • 12 Gb/s NVMe and SATA support fast storage
  • Drive activity LED shows real-time status

Specifications

No published specifications for this item yet.

Questions about this item

What PCIe slot generation does the MegaRAID 9540-2M2 require for full performance?

The adapter uses PCIe 4.0 connectivity, so a PCIe 4.0 slot provides the full 12Gb/s bandwidth for NVMe and SATA drives.

Can I mix existing SATA drives with new NVMe drives on this controller?

Yes, the MegaRAID 9540-2M2 supports both NVMe and SATA drives simultaneously in RAID 0 or 1 configurations.

How do I confirm the RAID array is healthy after installation?

Check the drive activity LED on the adapter; a steady or blinking pattern indicates normal I/O, while the MegaRAID management software reports array status as Optimal.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.