Brileine CAT6-S1 50 shielded pass-through RJ45 connectors + 50 strain relief boots
A 50-pack of Cat 6 shielded pass-through RJ45 connectors plus 50 strain relief boots for 24 to 26 AWG solid or stranded FTP/STP cable
- TypeShielded, Male-to-Female
- Changer TypeEthernet, Male-to-Female
- ColorSilver
- Cable Length300 meters
- Wire GaugeEthernet
- SpecificationsData Transfer, High Speed, Male-to-Female, 1000 megabits_per
- Pass-through design shows wire order for fewer bad crimps
- Shielded metal shell blocks external interference on every link
- Gold-plated 3-prong contacts deliver 1000 megabits per second throughput
- Strain-relief boots lock cables tight and protect the plug junction
- 50 connectors plus 50 boots terminate up to 300 metres of 24-26 AWG cable
50 shielded pass-through connectors + 50 boots
This 100-piece kit supplies 50 Cat 6 shielded pass-through RJ45 plugs and 50 matching strain-relief boots. The pass-through design lets installers verify wire order before crimping, reducing failed terminations. Gold-plated, three-point staggered contacts support up to 1000 megabits per second on solid or stranded 24 to 26 AWG cable with insulation diameters of 1.05 to 1.15 mm.
Installers terminating shielded Cat 6 or Cat 5e runs
Suited for technicians who need shielded ends and want visual confirmation of conductor sequence during assembly. The 1.1 mm conductor holes accept standard FTP/STP cables and work with most pass-through crimping tools. Not for installers who only have non-pass-through crimpers, who need unshielded plugs, or who require connectors rated for cable gauges outside the 24 to 26 AWG range.
1.1 mm maximum conductor-hole diameter
This single dimension decides whether your cable fits. The connectors accept insulation diameters from 1.05 to 1.15 mm, covering typical Cat 6 and Cat 5e solid or stranded conductors. If your cable insulation exceeds 1.15 mm or falls below 1.05 mm, these plugs will not seat correctly and a different connector is required.
Highlights
- Pass-through design shows wire order for fewer bad crimps
- Shielded metal shell blocks external interference on every link
- Gold-plated 3-prong contacts deliver 1000 megabits per second throughput
- Strain-relief boots lock cables tight and protect the plug junction
- 50 connectors plus 50 boots terminate up to 300 metres of 24-26 AWG cable
Specifications
| Brand | Brileine |
|---|---|
| Series | (Shielded) 50+50 |
| Model | CAT6-S1 |
| Part Number | CAT6-S1 |
| Type | Shielded, Male-to-Female |
| Changer Type | Ethernet, Male-to-Female |
| Color | Silver |
| Cable Length | 300 meters |
| Wire Gauge | Ethernet |
| Specifications | Data Transfer, High Speed, Male-to-Female, 1000 megabits_per_second, cat_6, Ethernet, Silver, Laptop, Printer, Router, CAT6-S1 |
| Connector Plating | Metal |
| Features | Data Transfer, High Speed |
| Dimensions | 20' |
| Weight | 0.249 kilograms |
| Package Quantity | 100 Count |
| Package Contents | 100 x 50+50 |
| Disclaimer | IEEE, not_applicable |
Questions about this item
Should I buy the 50-pack or the 100-count bundle for my Cat 6 installation?
The listing supplies 50 shielded pass-through RJ45 connectors plus 50 strain relief boots in a single 100-count package, so one purchase covers both termination and cable protection.
What does the 1000 megabits per second rating mean when I crimp these onto solid 24 AWG cable?
The connectors are specified for Cat 6 performance up to 1000 megabits per second; with 24 AWG solid or stranded conductors and a 1.10 mm through-hole they maintain that throughput when terminated correctly.
Are these 8P8C plugs limited to the Cat 6 standard or do they also work with Cat 5e cabling?
They are fully backward compatible with Cat 5e FTP or STP cable as well as Cat 6, using the same 24 to 26 AWG range and 1.05 to 1.15 mm insulation diameter.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



