We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray spill kit in a 39 in tall polyethylene kaddie, 18 in wide, filled with socks, pillows, roll, goggles and gloves

Brady Spc Absorbents

Brady Spc Absorbents SKA-K2 Spill Kit Universal Gray 22 gal

SKU CH-AZYA-NYJZ3

Universal 22-gallon spill kit in a 39-inch high gray polyethylene kaddie with socks, pillows, roll, goggles and gloves

  • ColorGray
  • MaterialHAWA
  • Absorbs up to 22 gal of universal fluids per kit
  • 39 in high by 18 in wide Kaddie container for mobility
  • Includes 5 socks, 8 pillows and a 15 in x 73 ft roll
  • Supplied with goggles and nitrile gloves for personal protection
  • Meets EPA 40 CFR 112.7 and OSHA 29 CFR 1910.120 standards

Brady Spill Kit 22 gal

This universal spill kit absorbs up to 22 gallons of fluid and ships inside a gray polyethylene Kaddie container. It is designed for facilities that need an all-in-one response package for oils, coolants, solvents and water-based liquids.

Thermals noise and power draw

The kit contains passive sorbent materials only and has no powered components, so it produces no heat, noise or electrical draw during use or storage. Deployment relies entirely on manual placement of the included socks, pillows and roll.

Upgrades and replacements

It replaces loose absorbent stocks and improvised containment methods with a pre-counted, regulation-aligned set that meets EPA 40 CFR 112.7 and OSHA 1910.120 requirements. The jump is worth it when a facility needs documented compliance and rapid, grab-and-go access without assembling kits from bulk supplies.

Highlights

  • Absorbs up to 22 gal of universal fluids per kit
  • 39 in high by 18 in wide Kaddie container for mobility
  • Includes 5 socks, 8 pillows and a 15 in x 73 ft roll
  • Supplied with goggles and nitrile gloves for personal protection
  • Meets EPA 40 CFR 112.7 and OSHA 29 CFR 1910.120 standards

Specifications

ColorGray
BrandBRADY SPC ABSORBENTS
MaterialHAWA

Questions about this item

How do I set up the 39-inch high Kaddie container and what step is commonly missed?

Place the Kaddie on a level surface near spill-prone areas; the step often missed is not distributing the 5 socks, 8 pillows, and 15-inch by 73-foot roll so each fluid type can be reached without moving the container.

Which components will need replacement after the kit absorbs its 22-gallon capacity?

All sorbents — the 5 socks, 8 pillows, and roll — are single-use and must be replaced once saturated; the goggles and nitrile gloves should also be inspected and replaced if contaminated or damaged.

What regulatory limit governs how long the deployed sorbents can remain in place during an ongoing spill response?

OSHA 29 CFR 1910.120 and EPA 40 CFR 112.7 require that saturated sorbents be removed and disposed of promptly to maintain compliance; the kit itself is not landfill-disposable, so used materials must follow applicable waste regulations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.