We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Narrow glossy blue vinyl tape roll 1/2 in 50 ft

Brady

Brady 121128 B-7569 Floor Marking Tape vinyl 1/2 in 50 ft

SKU CH-P1ME-87883

Transparent vinyl floor marking tape in a continuous 50 ft roll, 1/2 in wide and 4 mil thick with a gloss finish

  • ColorTransparent
  • Transparent vinyl tape marks floors without obscuring surfaces
  • 50 ft continuous roll covers long aisles in one piece
  • 4 mil thickness resists tears from heavy foot traffic
  • Gloss finish stays legible under warehouse lighting
  • B-7569 series rated for indoor facility safety use

Brady B-7569 Floor Marking Tape

Brady 121128 B-7569 is a vinyl floor marking tape supplied in a continuous roll. It measures 1/2 in wide and 50 ft long with a 4 mil thickness. The solid blue tape features a gloss finish and carries no printed legend. It is designed for facility and traffic safety marking applications.

Non-reflective vinyl with gloss finish

The tape uses a non-retroreflective vinyl construction with a gloss surface. It does not glow in the dark and provides no retroreflective grade. The material is intended for standard indoor marking where reflective or photoluminescent properties are not required. Its thin profile suits low-traffic floor areas.

Continuous roll for straight-line marking

Supplied as a single 50 ft roll, the tape allows uninterrupted runs for aisle or boundary lines. The solid blue colour and gloss finish remain consistent across the length. It is not suited for applications needing printed legends, retroreflectivity or glow-in-the-dark visibility. Buyers needing wider coverage or reflective grades should select a different product.

Highlights

  • Transparent vinyl tape marks floors without obscuring surfaces
  • 50 ft continuous roll covers long aisles in one piece
  • 4 mil thickness resists tears from heavy foot traffic
  • Gloss finish stays legible under warehouse lighting
  • B-7569 series rated for indoor facility safety use

Specifications

ColorTransparent
BrandBrady

Questions about this item

How do I apply the 1/2 in wide Brady 121128 tape so it stays down on a concrete floor?

Clean the surface until it is dry and free of oil, then press the vinyl tape firmly along its full 50 ft length; the step most often missed is using a hand roller to remove trapped air bubbles.

When will the 4 mil vinyl layer need replacing in a forklift aisle?

Expect to replace the roll once the gloss finish wears through to the blue base or edges start lifting, typically after heavy wheel traffic has abraded the 4 mil thickness.

At what temperature does the adhesive on this B-7569 series tape start to lose grip?

The vinyl tape is rated for standard indoor facility temperatures; sustained heat above typical warehouse conditions will soften the adhesive before the vinyl itself degrades.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.