Boytone
Boytone BT-324F 2.1 home audio speaker system 40W RMS
A 2.1 home audio system delivering 40W RMS with Bluetooth, FM radio, USB and SD playback plus bass and treble controls
- TypeHome Theater Speaker System
- Power RatingOutputpower: 30W+15Wx2 (RMS) Subwoofer: 6.50"60O 20W + Satel
- Frequency Response40Hz-20KHz
- Power Supply120V 60Hz
- ColorBlack
- Features2500W PMPO (Peak Music Power Output) FM Tuner MP3 Playback B
- 40 W RMS total power from 6.5" subwoofer and two 3" satellites
- Bluetooth wireless streaming from phones, tablets and computers
- Built-in FM radio with digital LED display
- USB and SD card MP3 playback without a separate device
- Bass and treble controls plus remote for tailored sound
System type and audience
The Boytone BT-324F is a 2.1 home theatre speaker system rated at 40W RMS across a 6.5-inch subwoofer and two 3-inch satellites. It suits buyers who want a compact, self-powered audio upgrade for television, music streaming or FM radio without a separate amplifier. Buyers who need more storage or multi-room zones will not find those features here.
Thermals noise and power
The system draws power from a 120V 60Hz AC outlet and runs its built-in amplification within the stated 40W RMS continuous rating. Distortion is specified at 0.3% or less with a signal-to-noise ratio of 80dB or higher and channel separation of 45dB or higher, indicating clean output at normal listening levels. No active cooling fans are present, so operation is silent aside from the audio programme.
Deciding specification
Total RMS output is 40 watts, split as 20 watts for the subwoofer and 10 watts per satellite. This single power figure determines whether the system can fill the intended room at the desired volume without external amplification.
Highlights
- 40 W RMS total power from 6.5" subwoofer and two 3" satellites
- Bluetooth wireless streaming from phones, tablets and computers
- Built-in FM radio with digital LED display
- USB and SD card MP3 playback without a separate device
- Bass and treble controls plus remote for tailored sound
Specifications
| Brand | Boytone |
|---|---|
| Model | BT-324F |
| Type | Home Theater Speaker System |
| Power Rating | Outputpower: 30W+15Wx2 (RMS) Subwoofer: 6.50"60O 20W + Satellite 3"4O 10Wx2 |
| Frequency Response | 40Hz-20KHz |
| Power Supply | 120V 60Hz |
| Color | Black |
| Features | 2500W PMPO (Peak Music Power Output) FM Tuner MP3 Playback Bluetooth Support USB/SD Support Bass Control Treble Control Digital Display Remote Control Separation: >=45dB Distortion: <=0.3% S/N: >=80dB |
| Dimensions & Weight | Unit Size: 16.00" x 14.00" x 12.00" Weight: 14.00 lbs. |
Questions about this item
How do I connect the two satellite speakers to the subwoofer unit and what is the common mistake?
The satellites are wired to the subwoofer using their attached cables; plug each into the matching left and right terminals on the rear. The step people get wrong is reversing the channels, which swaps the stereo image.
What part of this system will need replacement first after extended use?
The 6.50 inch subwoofer driver and the two 3 inch satellite drivers are the only moving parts; their surrounds can dry out over many years and are the components most likely to require replacement.
At what volume level does distortion become audible during a long listening session?
The specifications list total harmonic distortion at or below .3 percent at rated output of 40 watts RMS; pushing the amplifier beyond that level is when distortion will rise noticeably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



