We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six-inch camera monitor with sunshade hood and battery attached

BoYata

BoYata VILTROX DC-X2 6 2 in 1 accessory

SKU CH-8G0B-B0MD9

Six-inch 1920×1080 field monitor delivers 2000 nits brightness, 4K HDMI pass-through, and professional scopes with included NP-F550 battery

  • Bright outdoor viewing with 2000 nits brightness and 160° wide angle
  • Sharp 1920 x 1080 Full HD detail on a 6 inch touchscreen
  • 4K HDMI input and output at 30, 25, 24 Hz for multi-screen workflows
  • Professional tools including 3D LUT, focus peaking, vectorscope, zebras and false colour
  • Flexible power from NP-F550 battery or USB-C with pass-through to other devices

6 Inch 2000 Nit Field Monitor

The VILTROX DC-X2 is a 6 inch camera monitor with a 1920x1080 touchscreen and 2000 nits brightness for clear outdoor viewing. It targets solo shooters and small crews who need accurate exposure tools on location. The 1000:1 contrast ratio and 160 degree viewing angle keep the image consistent when collaborators gather around the screen. Weighing 11.46 oz, it adds minimal bulk to a gimbal or cage rig.

4K HDMI Loop Through 30 Hz

HDMI input accepts 3840x2160 and 4096x2160 signals at 24, 25 and 30 Hz while passing a clean signal to a second display or recorder. The panel itself remains Full HD so 4K sources are downscaled for monitoring only. A 3.5 mm headphone jack enables live audio confidence checks without extra hardware. Directors can feed a client monitor while the operator retains full waveform and vectorscope overlays.

NP-F550 Battery and USB-C Power

The kit includes an NP-F550 battery and USB-C cable so the monitor runs immediately without a separate DC adapter. Power passthrough lets the same battery top up a camera or wireless receiver, reducing cable count on the rig. A supplied sunshade hood cuts glare in bright daylight and folds flat for transport. Build quality feels solid for daily run-and-gun use but the plastic chassis is not weather sealed.

Highlights

  • Bright outdoor viewing with 2000 nits brightness and 160° wide angle
  • Sharp 1920 x 1080 Full HD detail on a 6 inch touchscreen
  • 4K HDMI input and output at 30, 25, 24 Hz for multi-screen workflows
  • Professional tools including 3D LUT, focus peaking, vectorscope, zebras and false colour
  • Flexible power from NP-F550 battery or USB-C with pass-through to other devices

Specifications

No published specifications for this item yet.

Questions about this item

Will the 4K 30Hz HDMI output drive my older 1080p field recorder without scaling issues?

Yes, the HDMI output passes 3840×2160 at 30 Hz and down-scales cleanly to 1920×1080 for legacy recorders.

How do I confirm the 2000-nit panel and focus peaking are active after power-up?

Open the on-screen menu — the brightness slider tops out at 2000 nits and the peaking overlay appears in red when enabled.

Does the box include the NP-F550 battery and sunshade hood, or must I buy them separately?

The NP-F550 battery, USB-C cable and sunshade hood are all included; only a DC power adapter is not supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.