We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brown RG142 coaxial cable 10 metres double shielded PVC jacket

BoYata

BoYata RG142 2 in 1 Accessory 10M Brown Double Shielded

SKU CH-G89F-J166R

A 10-metre RG142 low-loss coaxial cable with 50-ohm impedance, double silver-plated copper shielding and PTFE insulation rated to 8000 MHz

  • Low-loss signal up to 8000 MHz with 1.15 VSWR
  • Double silver-plated copper braid shields against interference
  • PTFE insulator keeps loss low across 10 m run
  • 50 ohm impedance matches standard RF systems
  • Silver-plated copper core (0.93 mm) ensures stable conductivity

RG142 Double-Shielded Coaxial Cable

The BoYata RG142 is a 10-metre low-loss RF coaxial cable built for 50-ohm signal paths. Its silver-plated copper inner conductor and PTFE insulator sit beneath a silver-plated copper double braid, giving a VSWR of 1.15 up to 8000 MHz. The brown PVC jacket measures 4.95 mm overall diameter.

Installers Needing Reliable 50-Ohm Runs

This cable suits RF engineers, amateur radio operators and installers who need consistent impedance and low loss over 32.8 feet at frequencies up to 8 GHz. Buyers who require a different impedance, a single-shield construction or a halogen-free jacket should look at other cable types.

10-Metre Length With 8 GHz Headroom

At 10 metres the RG142 comfortably handles VHF, UHF and microwave links up to 8000 MHz with minimal reflection. Beyond that frequency or over significantly longer runs the attenuation and VSWR will exceed the specified 1.15 figure.

Highlights

  • Low-loss signal up to 8000 MHz with 1.15 VSWR
  • Double silver-plated copper braid shields against interference
  • PTFE insulator keeps loss low across 10 m run
  • 50 ohm impedance matches standard RF systems
  • Silver-plated copper core (0.93 mm) ensures stable conductivity

Specifications

No published specifications for this item yet.

Questions about this item

What connector type does the RG142 cable need on my radio or antenna to work?

The cable itself is a 50 ohm RG142 coaxial line with silver-plated copper double braid; you must fit or buy connectors that match the 0.93 mm inner conductor and 4.95 mm jacket diameter.

Will the 10 m length and 8000 MHz rating let me keep my existing 50 ohm gear without extra loss?

Yes, the 10 m run is rated to 8000 MHz with a 1.15 VSWR, so legacy 50 ohm equipment stays matched if you use proper connectors for the 2.95 mm insulator and 3.95 mm shield.

How can I verify the double-shielded RG142 is performing correctly after installation?

Measure return loss or VSWR at the operating frequency; a reading at or below 1.15 across the band confirms the silver-plated copper braid and PTFE insulator are working as specified.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.