We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular outdoor PoE extender unit with Ethernet ports

BoYata

BoYata Gigabit PoE Extender IP67 330ft 2 in 1 accessory

SKU CH-DADX-ZTW4N

Extend Power over Ethernet and data up to 330 feet at gigabit speed with IP67 outdoor-rated, plug-and-play operation

  • Extends PoE and data 330ft at 1000Mbps
  • IP67 waterproof rating withstands -10C to 50C outdoor conditions
  • IEEE802.3af/at compliant delivering up to 30W for PoE devices
  • Cascade deployment reaches 1300ft total with 10Mbps beyond 850ft
  • Plug-and-play installation requires no configuration

Gigabit PoE extension for outdoor devices

This BoYata extender adds 330ft of reach to a PoE network while keeping Gigabit 1000Mbps bandwidth. It is built for IP cameras, VoIP phones and access points that need power and data over a single cable. The unit is rated IP67 and operates from -10C to 50C, so it survives rain, dust and temperature swings in exposed locations.

IEEE 802.3 af/at limits and cascade behaviour

The extender accepts 44V to 57V PoE input and delivers up to 30W to the connected device; it does not support 24V PoE equipment. With two units cascaded the total reach grows to 1300ft, yet bandwidth drops to 10Mbps beyond 850ft on Cat5e cable. The longer the run, the lower the throughput, so plan the topology around the distance you actually need.

30W headroom and non-PoE constraint

The 30W output covers most standard PoE cameras, phones and speakers with comfortable margin. It cannot power a non-PoE device unless a standard PoE device is attached first to activate the extender. Buyers who need to inject power for non-PoE gear or who require runs beyond 1300ft will need a different solution.

Highlights

  • Extends PoE and data 330ft at 1000Mbps
  • IP67 waterproof rating withstands -10C to 50C outdoor conditions
  • IEEE802.3af/at compliant delivering up to 30W for PoE devices
  • Cascade deployment reaches 1300ft total with 10Mbps beyond 850ft
  • Plug-and-play installation requires no configuration

Specifications

No published specifications for this item yet.

Questions about this item

Should I use a single unit or cascade two for a 1,000 ft run?

One extender adds 330 ft at 1000 Mbps; two cascaded units reach 1,300 ft but bandwidth drops to 10 Mbps beyond 850 ft.

What does the 330 ft Gigabit claim mean once the extender is installed?

It delivers 1000 Mbps up to the extra 330 ft; beyond that distance speeds fall, reaching 10 Mbps at the 850 ft mark on Cat5e cable.

Which PoE standard does the extender use and what power limit does that set?

It follows IEEE802.3af/at, so the output port supplies up to 30 W at 44–57 V and does not support 24 V PoE devices.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.