BoYata
BoYata 81" 2-in-1 Tripod Monopod 35Lb 38mm Ball Head
A 23-to-81-inch aluminum tripod converts to a 31-to-83-inch monopod, supports 35 lb on a 38 mm ball head with 360° pan and ±90° tilt, and folds to 16.5 inches
- Adjustable height from 23 to 81 inches for versatile shooting angles
- Folds to 16.5 inches for easy transport in backpack or suitcase
- Independent leg angle adjustments with reversible center column enable macro photography
- 38 mm ball head offers 360-degree panning and plus 90 minus 70 tilt with three bubble levels
- Converts to monopod with 31 to 83 inch height range using removable center column and detachable leg
Tripod and monopod in one
This 2-in-1 accessory converts from a tripod to a monopod by removing the centre column and one leg. Height adjusts from 23 inches to 81 inches as a tripod and 31 inches to 83 inches as a monopod. It folds to 16.5 inches for transport in a backpack or suitcase.
Payload capacity and leg stability
The 30 mm diameter leg tubes support a 35 lb payload while keeping the platform stable. Three independent leg-angle settings adapt the stance to uneven terrain. A reversible centre column enables low-angle and macro shooting positions.
38 mm ball head with full movement
The ball head provides 360 degree panning and tilt from +90 to -70 degrees. Three built-in bubble levels help level the horizon for landscape or portrait framing. A precise 360-degree scale assists with accurate panoramic alignment. || Buyers who need a fluid video head or a geared head for architectural precision should look elsewhere. Builders who require a carbon-fibre construction for lighter carry weight are not served by this aluminium model.
Highlights
- Adjustable height from 23 to 81 inches for versatile shooting angles
- Folds to 16.5 inches for easy transport in backpack or suitcase
- Independent leg angle adjustments with reversible center column enable macro photography
- 38 mm ball head offers 360-degree panning and plus 90 minus 70 tilt with three bubble levels
- Converts to monopod with 31 to 83 inch height range using removable center column and detachable leg
Specifications
No published specifications for this item yet.
Questions about this item
How do I set the 5-section legs to the 23-inch minimum height without losing stability?
Unlock each 30 mm leg section, slide them down to the shortest position, then set the three independent leg angles to match the ground before tightening the locks.
What parts of the 38 mm ball head will need tightening or replacement after heavy use?
The quick-release plate screw, the panning lock knob and the tilt tension knob are the only moving parts that can loosen; keep a hex key handy for periodic re-torquing.
At what payload does the 30 mm leg tube show flex first during long exposures?
The 35 lb rated capacity is the limit; beyond that the 30 mm tubes and center column introduce vibration that ruins sharp images.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



