We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A slim 14 inch FHD IPS matte LCD panel with a 30 pin eDP connector

BoYata

BoYata 14" FHD IPS Matte eDP 30-pin Screen Replacement 2 in 1 accessory

SKU CH-DWBH-FKYFQ

A 14-inch FHD IPS matte non-touch panel with a 30-pin eDP connector, supplied new with adhesive tape for Lenovo FRU 5D10W87242 NV140FHM-N4V V8.0 V8.1 models

  • 14 inch FHD IPS clarity for sharp visuals
  • Matte finish cuts glare for comfortable viewing
  • 30 pin eDP connector matches original hardware
  • Includes stretch release adhesive tape for easier fitting
  • Non touch panel keeps weight and cost down

14" FHD IPS Matte Replacement Screen

This 14 inch display offers a 1920 by 1080 resolution with an IPS panel and a matte finish. It uses a 30 pin eDP connector and is designed as a non touch replacement for compatible Lenovo 2 in 1 laptops. The slim PCBA flat shape fits models requiring FRU 5D10W87242 or NV140FHM N4V V8.0 and V8.1 panels. Buyers needing a touch screen or a different connector type cannot use this part.

Thermals Noise and Power Draw

As a passive LCD component the screen generates no audible noise and adds negligible heat to the system. Power consumption is limited to the backlight and panel drive circuitry drawn through the eDP link. No fan or active cooling is involved so acoustic profile and thermal load remain unchanged from the original display. Installers must disconnect battery power before fitting to avoid electrical damage.

Included Adhesive Tape Simplifies Installation

The package supplies a complimentary double sided stretch release adhesive tape to secure the panel during reassembly. No control board bezel back cover tools or instructions are provided so the original parts must be reused. Matching the exact resolution backlight size and touch specification is mandatory otherwise the screen will not function. The tape allows clean removal if alignment adjustments are needed.

Highlights

  • 14 inch FHD IPS clarity for sharp visuals
  • Matte finish cuts glare for comfortable viewing
  • 30 pin eDP connector matches original hardware
  • Includes stretch release adhesive tape for easier fitting
  • Non touch panel keeps weight and cost down

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 14" eDP 30-pin screen without brackets and which step is often missed?

Remove power and detach the battery cable first, then fit the slim PCBA-flat panel using the supplied stretch-release adhesive tape; the step most people skip is disconnecting the battery before unplugging the display cable.

What maintenance or replacement will this non-touch FHD IPS matte panel need later?

The panel itself has no user-serviceable parts; if backlight uniformity fades or the eDP connector fails after extended use, the entire screen assembly must be replaced.

What limit appears first during sustained use of the 1920×1080 14" display?

Continuous operation can cause gradual backlight dimming or colour shift before the eDP signal degrades, so brightness consistency is the first practical limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.