We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten small rectangular SFP+ transceiver modules in a pack

BoYata

BoYata 10Pack 10GBase-LR SFP+ Transceiver 2 in 1 accessory

SKU CH-GVXJ-VB7QM

A 10-pack of 10GBase-LR SFP+ transceivers for 10 km single-mode fibre links at 1310 nm

  • 10Gb/s single-mode links up to 10km with 1310nm wavelength
  • Works with Cisco, Meraki, Ubiquiti, D-Link, Supermicro, Netgear and other open switches
  • Hot-pluggable design with 90-degree latch release for quick installation
  • Each module individually tested on multiple switches before shipping
  • Ten modules in one pack for multi-port deployments

Ten-pack 10GBase-LR SFP+ modules

This ten-pack supplies 10GBase-LR SFP+ transceivers for network engineers expanding 10 Gb/s links over single-mode fibre. Each module operates at 1310 nm with a duplex LC interface and supports distances up to 10 km. The hot-pluggable design allows insertion or removal without powering down the switch. Target users manage Cisco, Meraki, Ubiquiti, D-Link, Supermicro, Netgear or other open-standard switches.

Check switch port and fibre type

Verify that the switch ports accept SFP+ form-factor modules and are licensed for third-party optics where required. Confirm the existing cabling is single-mode fibre with duplex LC connectors matching the 1310 nm wavelength. Ensure the link budget allows the 10 km reach and that the switch firmware recognises the module’s digital diagnostic monitoring data.

Sustained 10 Gb/s throughput

Under continuous load the transceivers maintain line-rate 10 Gb/s transmission across the full 10 km distance without throttling. Digital diagnostic monitoring reports real-time temperature, voltage and optical power so administrators can track link health during prolonged operation. The latch mechanism releases with a 90 degree turn, allowing quick module swaps during maintenance windows without interrupting adjacent ports.

Highlights

  • 10Gb/s single-mode links up to 10km with 1310nm wavelength
  • Works with Cisco, Meraki, Ubiquiti, D-Link, Supermicro, Netgear and other open switches
  • Hot-pluggable design with 90-degree latch release for quick installation
  • Each module individually tested on multiple switches before shipping
  • Ten modules in one pack for multi-port deployments

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the 10-pack and do I need to buy fibre patch cables separately?

The pack contains ten 10GBase-LR SFP+ transceivers with duplex LC connectors. Single-mode fibre patch cables with LC ends are required but not included.

Which version should I choose for a Cisco SFP-10G-LR or Ubiquiti UF-SM-10G switch?

These modules are built to the 10GBase-LR standard at 1310 nm and are tested for Cisco SFP-10G-LR, Meraki MA-SFP-10GB-LR, Ubiquiti UF-SM-10G, Mikrotik, D-Link, Supermicro and Netgear open switches.

What does the 10 km reach mean when the transceiver is installed in a live switch?

At 10 Gb/s over single-mode fibre the 1310 nm optics support links up to 10 km provided the fibre plant and patch cords meet single-mode specifications and total insertion loss stays within the module budget.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.