We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New Boxlight SE-1hd projector lamp module with 135W UHP bulb in housing

BOXLIGHT

BOXLIGHT SE-1hd POA-LMP54 135W projector lamp

SKU CH-034X-80GHN

Replacement projector lamp module with a 135W UHP bulb and housing, rated for 3,000 hours of use

  • TypeUHP
  • Wattage135W
  • Lamp Life3,000 Hrs.
  • Ready-to-install module with 135W Philips UHP bulb
  • 3,000-hour rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • OEM-sourced from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
  • Tested for beam performance, ignition, voltage and run-time

Boxlight SE-1hd 135W projector lamp

This replacement lamp module fits Boxlight SE-1hd projectors and arrives as a fully assembled bulb and housing for straightforward installation. It is intended for users who need to restore original brightness when the existing lamp reaches end of life.

OEM-grade build with Philips UHP bulb

The module uses a genuine Philips UHP 135W bulb mounted in a precision housing that aligns with the projector’s existing connector and mounting points. Manufacturing follows ISO 9001 quality checks covering beam performance, ignition voltage and run-time so the lamp seats correctly and operates reliably day to day.

3,000-hour rated lamp life

The lamp is rated for 3,000 hours of typical use, which determines how long the projector can run before another replacement is needed. Buyers who require a longer interval between changes should note this fixed rating.

Highlights

  • Ready-to-install module with 135W Philips UHP bulb
  • 3,000-hour rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • OEM-sourced from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
  • Tested for beam performance, ignition, voltage and run-time

Specifications

BrandBoxlight
TypeUHP
Wattage135W
Lamp Life3,000 Hrs.

Questions about this item

What wattage does the UHP bulb in this lamp module draw?

The included Philips UHP bulb is rated at 135W, matching the original specification for the SE-1hd projector.

Which housing does the POA-LMP54 module use for mounting?

It ships as a fully assembled bulb-and-housing unit designed to drop straight into the Boxlight SE-1hd lamp compartment.

How do I install the lamp module and what step is often missed?

Power off and cool the projector, open the lamp door, remove the old module, insert the new POA-LMP54 until it seats firmly, close the door, then reset the lamp timer in the menu so the 3,000-hour counter starts clean.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.