BOXLIGHT
BOXLIGHT Eco 30N Projector Lamp 230W 4000 hrs
A 230 W NSH lamp module rated for 4,000 hours, supplied as a complete housing for quick replacement
- TypeNSH
- Wattage230W
- Lamp Life4,000 hrs
- Ready-to-install module with new Ushio 230W bulb
- 4000-hour lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Genuine OEM replacement fits Boxlight projectors
- Fully assembled housing enables quick installation
BOXLIGHT Eco 30N Projector Lamp
The BOXLIGHT Eco 30N is a complete projector lamp module supplied as a new replacement unit. It arrives with a 230W Ushio NSH bulb already fitted inside its housing, so it is ready for immediate installation in compatible Boxlight projectors.
Suitable for Boxlight owners needing a direct lamp
This module suits users who want a factory-assembled lamp that matches the original specifications. It is not intended for projectors that require a different wattage, a different bulb type, or a bare bulb without the housing.
230W NSH bulb rated for 4000 hours
The 230W NSH lamp delivers up to 4000 hours of typical operation before replacement is needed. Once the rated hours are reached, brightness will decline and the lamp must be changed to maintain image quality.
Highlights
- Ready-to-install module with new Ushio 230W bulb
- 4000-hour lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Genuine OEM replacement fits Boxlight projectors
- Fully assembled housing enables quick installation
Specifications
| Brand | Boxlight |
|---|---|
| Type | NSH |
| Wattage | 230W |
| Lamp Life | 4,000 hrs |
Questions about this item
Which Boxlight projectors accept the ECO-930 lamp module?
The ECO-930 module is built as a direct replacement for Boxlight projectors that originally shipped with the Eco 30N lamp, so it fits the same housing and connector without modification.
Will the 230W NSH bulb match the brightness and ignition timing of the original lamp in my older unit?
Each lamp is tested for beam performance, ignition, voltage and run-time to meet ISO9001 standards, so the 230W NSH bulb delivers the same output and start-up behaviour as the factory module.
How can I confirm the new lamp is running correctly after installation?
Reset the projector’s lamp-hour counter, then verify the image reaches full brightness with stable colour and no flicker during the first few hours of operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



