We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White USB-C power adapter with 1.5 m cable and inline on/off switch

BONAEVER

BONAEVER Raspberry Pi 4B 5V 3A USB-C Power Supply with Switch

SKU CH-7QQ4-ZX7BF

A 1.5 m USB-C cable with an on-off switch delivers 5 V 3 A to a Raspberry Pi 4 from 100-240 V AC mains

  • TypeOthers
  • Wide 100-240 V input suits global mains
  • 5 V 3000 mA output powers Raspberry Pi 4 and USB devices
  • 5 m cable gives flexible placement
  • Built-in on/off switch restarts Pi without unplugging
  • Ready-to-use adapter includes everything in one pack

5V 3A USB-C power supply for Raspberry Pi 4

This supply delivers a steady 5 volts at 3 amps to the Raspberry Pi 4 through a USB-C connector. It accepts worldwide mains voltages from 100 to 240 volts at 50 or 60 hertz. The unit is aimed at hobbyists and developers who need reliable power for the board and attached USB peripherals.

Simple plug-in installation with inline switch

Connect the 1.5 metre cable to the Pi's USB-C port and plug the adapter into a wall socket. An integrated on-off switch on the cable lets you reboot the board without unplugging it. The only common issue is using a thinner cable that cannot carry the full 3 amp load.

Powers Pi 4 plus USB devices within 3 amp limit

The 3000 milliamp output comfortably runs a Raspberry Pi 4 together with typical USB accessories such as a keyboard, mouse and storage drive. Headroom disappears when multiple high-draw peripherals are added simultaneously. It is not suited for setups that exceed the 3 amp rating.

Highlights

  • Wide 100-240 V input suits global mains
  • 5 V 3000 mA output powers Raspberry Pi 4 and USB devices
  • 5 m cable gives flexible placement
  • Built-in on/off switch restarts Pi without unplugging
  • Ready-to-use adapter includes everything in one pack

Specifications

TypeOthers

Questions about this item

How can I verify the 5V 3A USB-C power supply is working correctly after connecting it to my Raspberry Pi 4?

The Pi should boot reliably without a low-voltage warning, and the red power LED stays solid while the switch on the 1.5 metre cable toggles the board on and off cleanly.

What comes in the box and do I need any extra cables or adapters?

The package includes one 5V 3A USB-C power supply with an integrated 1.5 metre cable and an inline on/off switch; no additional cables or adapters are required for a Raspberry Pi 4.

Which version of this supply should I choose for a Raspberry Pi 4?

This single 5V 3000mA USB-C model with a 1.5 metre switched cable is the only version listed and matches the Pi 4's power requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.