We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue plastic and metal adapter board with M.2 slot and PCIe x1 edge connector

BONAEVER

BONAEVER PCIe x1 to M.2 NVMe Adapter bag

SKU CH-HT9Q-9PJRC

A PCIe x1 to M.2 NVMe adapter supporting 2230, 2242, 2260 and 2280 SSDs with plug-and-play installation

  • Case TypeProtection Case
  • Full-speed PCIe x1 link keeps NVMe SSD at native throughput
  • M-key connector accepts 2230 2242 2260 2280 form factors
  • Plug-and-play design needs no extra drivers
  • Compact 24 × 100 × 5 mm board fits tight chassis
  • Includes two M2 screws a nut and a screwdriver for quick install

PCIe x1 M.2 NVMe Adapter

This adapter converts a single PCIe x1 slot into an M key M.2 connector for NVMe solid-state drives. It accepts 2230 2242 2260 and 2280 form factors and fits into a standard desktop expansion slot. The board measures 24x100x5mm and includes mounting screws a nut and a screwdriver for immediate installation.

Compatibility check before ordering

Verify that your motherboard has a free PCIe x1 slot and that its BIOS can boot from an NVMe device attached through that slot. Confirm the drive you plan to use is an M key NVMe module in one of the supported lengths. The adapter draws power directly from the slot so no extra power cable is required.

Sustained operation behaviour

The plastic and metal construction provides basic heat dissipation during continuous read and write workloads. Because the link is limited to a single PCIe lane sequential throughput will plateau at the x1 ceiling rather than the drive’s peak rating. Thermal throttling may occur sooner than on a full x4 motherboard slot under heavy sustained traffic.

Highlights

  • Full-speed PCIe x1 link keeps NVMe SSD at native throughput
  • M-key connector accepts 2230 2242 2260 2280 form factors
  • Plug-and-play design needs no extra drivers
  • Compact 24 × 100 × 5 mm board fits tight chassis
  • Includes two M2 screws a nut and a screwdriver for quick install

Specifications

Case TypeProtection Case

Questions about this item

What comes in the box and do I need to buy any extra screws or tools?

The package includes one M.2 to PCIe x1 adapter board, two M.2 mounting screws with nuts, and a small screwdriver for installation. No extra hardware is required.

Which M.2 lengths does this adapter support?

The board accepts 2230, 2242, 2260 and 2280 form-factor SSDs using the M-key connector.

Will I get full NVMe speed through a PCIe x1 slot?

The adapter runs at PCIe x1 electrical width, so the drive will operate at single-lane bandwidth rather than the four lanes a native M.2 slot provides.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.