BONAEVER
BONAEVER M.2 SATA SSD Enclosure Case
A cable-free USB 3.0 enclosure that turns a B-key M.2 SATA SSD (2230, 2242, 2260 or 2280) into a portable drive with 5 Gbps transfer speeds
- Case TypeProtection Case
- Cable-free USB connection simplifies portable SSD use
- USB 3.0 interface delivers up to 5 Gbps transfer rates
- Supports four M.2 lengths: 2230, 2242, 2260, 2280
- Drawer-style case protects the SATA B-key drive inside
- Hot-swappable plug-and-play operation requires no driver installation
B-Key SATA Enclosure for M.2 Drives
This enclosure converts a B-key M.2 SATA SSD into a portable USB drive. It accepts 2230, 2242, 2260 and 2280 form factors without a separate cable. The built-in drawer design protects the drive during transport and use. Compliance with USB 3.0, SATA 3.0 and PCI Express M.2 1.0 specifications is included.
Suits SATA SSDs Only
Builders with B-key SATA modules gain a tool-free external drive for backup or data migration. Hot-swap and plug-and-play operation works on USB 3.0, 2.0 and 1.1 ports. Buyers needing PCIe-based B-key or any M-key SSD support cannot use this enclosure.
USB 3.0 5 Gbps Interface
The single decisive specification is the USB 3.0 connection delivering up to 5 Gbps transfer rate. On USB 2.0 the rate falls to 480 Mbps. If your workflow demands higher bandwidth than 5 Gbps, this enclosure will not meet that need.
Highlights
- Cable-free USB connection simplifies portable SSD use
- USB 3.0 interface delivers up to 5 Gbps transfer rates
- Supports four M.2 lengths: 2230, 2242, 2260, 2280
- Drawer-style case protects the SATA B-key drive inside
- Hot-swappable plug-and-play operation requires no driver installation
Specifications
| Case Type | Protection Case |
|---|
Questions about this item
Which M.2 form factor should I pick — 2230, 2242, 2260 or 2280?
The enclosure accepts all four lengths — 2230, 2242, 2260 and 2280 — so choose the one that matches your SATA B-key SSD.
What does the 5 Gbps USB 3.0 rating actually deliver with a SATA SSD inside?
The SATA 3.0 link tops out at 6 Gbps, so the USB 3.0 connection will not bottleneck the drive; expect near-SATA speeds on a USB 3.0 port.
The spec says USB 3.0 and SATA 3.0 — which standard caps the real-world throughput?
SATA 3.0 sets the ceiling at 6 Gbps; USB 3.0 runs at 5 Gbps, so the enclosure’s practical limit is the USB 3.0 interface.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



