We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with two HDMI inputs one HDMI output and a select button

BONAEVER

BONAEVER HDMI 2.1 2-in-1-out Switch 8K60 4K120 Pro Sound

SKU CH-D6GG-ZA5XA

A manual HDMI 2.1 switch routes two sources to one display at up to 8K60, 4K120 or 1080P240 with 48 Gbps bandwidth

  • Typebuffer_23449
  • Connect two sources to one display
  • Manual select button switches sources instantly
  • 48 Gbps bandwidth carries 8K 60 Hz video
  • 4K 120 Hz and 1080p 240 Hz supported
  • Backward compatible with earlier HDMI standards

Two-source HDMI 2.1 switch

This directional HDMI 2.1 switch connects two source devices to a single display. It supports 8K at 60 Hz, 4K at 120 Hz and 1080p at 240 Hz with bandwidth up to 48 Gbps. Manual switching via a front button lets you move between a console and a PC or streaming box. The unit does not split one source to two screens and does not support CEC control.

Passive operation with no external power

The switch draws power from the connected HDMI sources and runs without a separate adapter. No fans or active cooling are present, so operation is completely silent. Power consumption is negligible in normal use and adds no measurable load to the source devices. The aluminium housing passively dissipates any minimal heat generated during signal switching.

Compact block for desk or rack mounting

The small enclosure sits on a shelf or attaches with adhesive pads, requiring no rack rails or ventilation space. Three HDMI cables are needed — two from sources and one to the display — and are not included. All connected cables and source devices must support the target resolution and refresh rate to achieve 8K60 or 4K120 output. The switch frees up display inputs by consolidating two devices into one port.

Highlights

  • Connect two sources to one display
  • Manual select button switches sources instantly
  • 48 Gbps bandwidth carries 8K 60 Hz video
  • 4K 120 Hz and 1080p 240 Hz supported
  • Backward compatible with earlier HDMI standards

Specifications

Typebuffer_23449

Questions about this item

How do I install the BONAEVER HDMI 2.1 switch and what is the step people often get wrong?

Connect each source to the labelled input ports and the display to the single output port using separate HDMI cables; the common mistake is reversing the direction because this unit only works as two inputs to one output, not the other way round.

What maintenance or replacement will the BONAEVER HDMI 2.1 switch need later?

No internal components require servicing; only the external HDMI cables may need replacement if they become damaged or if you upgrade to higher-specification cables to support 8K60 or 4K120 signals.

What limit appears first during sustained use of the BONAEVER HDMI 2.1 switch?

The 48 Gbps bandwidth ceiling is the first hard limit; pushing 8K at 60 Hz or 4K at 120 Hz requires every link in the chain to sustain that rate, otherwise the signal drops to a lower resolution or refresh rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.