We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB-A to 6-pin serial adapter cable, three feet long

BONAEVER

BONAEVER FTDI USB to TTL Serial Adapter Cable 3.3V 6 Pin 3 ft

SKU CH-5FM7-MZHXZ

Connects 3.3 V logic UART devices to a laptop via USB using a genuine FT232RL chip and a 3 ft cable with 6-pin 0.1 inch header

  • Case TypeProtection Case
  • Genuine FT232RL chip ensures reliable serial communication
  • 3 V logic level matches 3.3 V UART devices
  • 3 ft cable length gives flexible placement
  • USB 2.0 Type-A male connector works with current PCs
  • Broad OS support includes Windows 11, 10, 8.1, 7, MacOS, Linux 2.4+

FTDI USB-to-TTL adapter cable

This FTDI USB-to-TTL adapter cable converts a USB 2.0 port into a 3.3 V logic-level serial interface for laptops and desktops. A genuine FT232RL chip handles UART signalling with configurable EEPROM and inverted-signal options. The six-pin 0.1 inch pitch female header exposes Tx, Rx, RTS#, CTS#, 5 V VCC and GND. Drivers support Windows 11, 10, 8, 8.1, 7, 2008, XP, Vista, CE, macOS and Linux 2.4+.

Replaces basic USB-serial dongles

It replaces generic USB-serial dongles that lack a genuine FTDI chip or 3.3 V logic output. The jump is worth it when firmware flashing, router console access or GPS modules demand reliable VCP or D2XX drivers and stable 3.3 V signalling. The three-foot length suits bench work without excess cable clutter.

Fits bench and field debugging setups

The cable plugs directly into a USB 2.0 Type-A port and the 0.1 inch header mates with standard pin strips on routers, set-top boxes, transmitters or hard-drive firmware headers. It frees up a dedicated serial port on legacy hardware and removes the need for a separate level shifter when targeting 3.3 V logic devices.

Highlights

  • Genuine FT232RL chip ensures reliable serial communication
  • 3 V logic level matches 3.3 V UART devices
  • 3 ft cable length gives flexible placement
  • USB 2.0 Type-A male connector works with current PCs
  • Broad OS support includes Windows 11, 10, 8.1, 7, MacOS, Linux 2.4+

Specifications

Case TypeProtection Case

Questions about this item

What pin pitch does the 6-pin female socket header on this BONAEVER adapter use?

The cable terminates in a 6-pin female socket header with a 0.1 inch pitch for direct connection to standard UART pins.

Which driver model should I select in Windows 11 to make the FT232RL appear as a standard COM port?

Install the FTDI VCP driver; it exposes the FT232RL as a virtual COM port so terminal programs can open it without extra code.

The red VCC line on the 6-way header supplies 5 V — what long-term check should I perform?

Verify with a multimeter that the VCC pin stays at 5 V under load; if it drifts low, the onboard regulator may be degrading.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.