BONAEVER
BONAEVER 36 LED Car Interior Light Kit bag
A 36 LED car interior lighting kit with sound-active colour change and wireless remote control, powered from a 12 V supply
- Case TypeProtection Case
- Multi-colour ambience with 36 LEDs across four strips
- Sound-reactive lighting shifts colour to music rhythm
- Wireless remote selects 8 colours and multiple modes
- Simple peel-and-stick fitting under seats or footwell
- Waterproof RGB strips suit car interior or party use
Car interior LED kit
The BONAEVER 36 LED kit adds multicolour ambient lighting to a vehicle cabin. Four flexible strips illuminate footwells and under-seat areas with eight selectable colours. A sound-active mode shifts hues in time with music or voice. The set runs from a 12 V DC supply and includes a wireless remote for colour, brightness and pattern changes.
Simple adhesive installation
Each strip carries double-sided tape; peel and press under front or rear seats according to wire length. The two shorter cables suit the front, the two longer cables reach the rear. The remote must point directly at the black receiver box without obstruction, otherwise commands will not register. Heating the mounting surface with a lighter before sticking improves adhesion.
12 V DC power limit
Operation is restricted to a 12 V DC source such as a vehicle accessory socket. The kit cannot be powered from household mains or higher-voltage systems without an appropriate converter. The wireless remote uses line-of-sight infrared, so range and reliability drop if the receiver is blocked by trim or cargo.
Highlights
- Multi-colour ambience with 36 LEDs across four strips
- Sound-reactive lighting shifts colour to music rhythm
- Wireless remote selects 8 colours and multiple modes
- Simple peel-and-stick fitting under seats or footwell
- Waterproof RGB strips suit car interior or party use
Specifications
| Case Type | Protection Case |
|---|
Questions about this item
How can I confirm the 36 LED strips are working after installation?
Turn on the kit with the wireless remote; all four strips should light up. Switch through the 8 colours and two jump or fade modes — each change should appear instantly. Play music and verify the colours shift in time with the beat using the sound-active function.
What is included in the box and what must I buy separately?
The kit contains four LED strips (two with shorter wires for the front, two with longer wires for the rear), a black receiver box, a wireless remote control and double-sided tape pre-attached to each strip. A 12 V power source such as a cigarette-lighter plug is required but not supplied.
Which version of this kit should I choose for a standard car interior?
This single 36 LED kit with four strips and a wireless remote is the only version offered; it is designed for universal fit in front and rear footwells and runs on 12 V DC.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



