We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular potentiometers and metal repair tools on a light surface

BONAEVER

BONAEVER 20pcs 2K3 Ohm Potentiometer for PS5 Controller

SKU CH-7GKH-8TXTT

20 replacement potentiometers with tools to fix PS5 stick drift through soldering

  • ColorBlack
  • PatternNone
  • Fixes stick drift, stuttering and dead zones with 2K3 Ohm sensor
  • 20 potentiometers included for multiple controller repairs
  • Complete tool kit supplied: screwdriver, tweezers, spudger, pry tools and bar
  • Designed exclusively for PS5 DualSense controllers, not compatible with PS4 or Xbox
  • Moderate soldering required for installation on ALPS analog joystick modules

PS5 Controller Potentiometer Kit

The BONAEVER kit supplies twenty 2K3 Ohm trim potentiometers designed exclusively for the DualSense PS5 controller. It targets repair enthusiasts and technicians who need to replace worn analog-stick sensors and restore accurate input response.

Thermals Noise and Power Draw

These passive resistive components generate no heat, produce no audible noise and draw no measurable power during normal controller operation. They function as direct sensor replacements without altering the electrical characteristics of the thumbstick module.

Included Tools and Repair Scope

The package adds a cross-head screwdriver, tweezers, a spudger, pry tools and a pry bar so the controller can be opened and the sticks accessed without extra purchases. Successful installation still demands moderate soldering skill and the kit does not address button, trigger or board-level faults.

Highlights

  • Fixes stick drift, stuttering and dead zones with 2K3 Ohm sensor
  • 20 potentiometers included for multiple controller repairs
  • Complete tool kit supplied: screwdriver, tweezers, spudger, pry tools and bar
  • Designed exclusively for PS5 DualSense controllers, not compatible with PS4 or Xbox
  • Moderate soldering required for installation on ALPS analog joystick modules

Specifications

ColorBlack
PatternNone

Questions about this item

How do I solder the 2K3 Ohm potentiometer onto the ALPS analog joystick module and what step causes the most failures?

Desolder the old potentiometer from the joystick PCB, clean the pads thoroughly, then solder the new 2K3 Ohm unit in place; the step most people get wrong is insufficient pad cleaning, which leaves cold joints and drift returns.

Which parts in the kit wear out and need replacement after repeated stick repairs?

The 2K3 Ohm potentiometers themselves are the consumable items — each stick repair uses one, so the 20-piece supply depletes with every drift fix; the included cross screwdriver, tweezers, spudger, pry tools and pry bar are reusable hand tools.

What is the first limitation that appears when the repaired controller is used for long gaming sessions?

The 2K3 Ohm potentiometer is a mechanical trim component; under sustained heavy use its internal wiper track wears, causing resistance drift that eventually brings back stick drift or dead zones.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.