BONAEVER
BONAEVER 2.5-inch SATA USB 3.0 Hard Drive Enclosure 3TB Black
Houses a 2.5-inch SATA drive up to 3TB with tool-free, hot-swap USB 3.0 connectivity and an LED indicator
- ColorBlack
- Tool-free installation gets your drive running in seconds
- USB 3.0 interface delivers up to 1320 Mbps theoretical speed
- ABS plastic housing protects the drive from everyday knocks
- Fits 7 mm and 9.5 mm 2.5 inch SATA drives up to 3 TB
- Works with Windows, Linux and Mac without extra drivers
What it is
The BONAEVER enclosure turns a 2.5 inch SATA hard drive or SSD into a portable USB 3.0 storage device. It accepts standard 7 mm and 9.5 mm drives and fits in a laptop bag or pocket. Tool-free assembly means the drive slides in and locks without screws. The ABS shell protects the drive from everyday knocks.
Capacity limit
Maximum supported capacity is 3 TB, so any larger drive will not be recognised. The JMS578 bridge chip handles SATA I, II and III protocols and presents the drive to the host over USB 3.0. No driver installation is required on Windows, Linux or macOS, and the LED shows power and activity status.
Sustained transfer
Theoretical USB 3.0 bandwidth is 1320 Mbps, but real-world throughput depends on the installed drive and file sizes. The compact 123 x 78 x 15 mm plastic body has no active cooling, so prolonged heavy reads or writes may cause the enclosure to warm up and the drive to throttle. Users needing continuous high-speed streaming should consider a larger ventilated enclosure.
Highlights
- Tool-free installation gets your drive running in seconds
- USB 3.0 interface delivers up to 1320 Mbps theoretical speed
- ABS plastic housing protects the drive from everyday knocks
- Fits 7 mm and 9.5 mm 2.5 inch SATA drives up to 3 TB
- Works with Windows, Linux and Mac without extra drivers
Specifications
| Color | Black |
|---|
Questions about this item
What real-world throughput can I expect from the 5 Gbps USB 3.0 link when the enclosure is in use?
The supplier lists a theoretical USB 3.0 speed of 1320 Mbps, though actual transfer rates will be lower due to drive performance and system overhead.
Which SATA revisions does the JMS578 bridge chip support inside this case?
The enclosure accepts SATA I, SATA II and SATA III drives, so any 2.5-inch SATA HDD or SSD up to 3 TB will work.
Will a 9.5 mm thick 2.5-inch drive fit inside the 15 mm high ABS shell?
Yes, the 15 mm internal height accommodates both 7 mm and 9.5 mm drives, and the tool-free tray holds them securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



