We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular adapter card with 44-pin male connector and 7+15 pin SATA female ports

BONAEVER

BONAEVER 2.5 Inch IDE to SATA Adapter Card Green

SKU CH-X5KP-3E7ZQ

Converts a 2.5 inch SATA hard drive to a 44-pin IDE interface for older motherboards

  • Case TypeProtection Case
  • Connect 2.5-inch SATA drives to legacy IDE motherboards
  • JM20330 chip enables 150 MB/s Serial ATA 1.0 throughput
  • Supports ATA 66/100/133 modes without extra power
  • Hot-swap capable with driver-free operation on Windows 98SE/2000/ME/XP/VISTA NT 4.0 LINUX
  • Compact 69 x 11 x 14 mm green ABS adapter card

Purpose & Audience

The BONAEVER 2.5 Inch IDE to SATA Adapter Card lets you connect a 2.5 inch SATA hard drive to a 44 pin IDE motherboard header. It suits owners of legacy laptops or industrial systems that still use IDE interfaces and want to install a modern SATA drive without external power.

Fit & Limits

The adapter works with ATA 66, 100 and 133 modes and follows the Serial ATA 1.0 specification for a maximum transfer rate of 150 MB/s. Systems that require SATA 3Gb/s or 6Gb/s throughput, or that need a 3.5 inch drive form factor, will not reach their intended performance with this device.

Deciding Specification

The JM20330 bridge chip handles the SATA to IDE conversion and supports hot swapping without driver installation under Windows 98SE, 2000, ME, XP, Vista, NT 4.0 and Linux. If your host board only provides a 44 pin IDE connector and you plan to use a 2.5 inch SATA drive, this adapter completes the link.

Highlights

  • Connect 2.5-inch SATA drives to legacy IDE motherboards
  • JM20330 chip enables 150 MB/s Serial ATA 1.0 throughput
  • Supports ATA 66/100/133 modes without extra power
  • Hot-swap capable with driver-free operation on Windows 98SE/2000/ME/XP/VISTA NT 4.0 LINUX
  • Compact 69 x 11 x 14 mm green ABS adapter card

Specifications

Case TypeProtection Case

Questions about this item

What are the dimensions of the green ABS adapter card?

The adapter card measures approximately 69 by 11 by 14 millimetres, or 2.7 by 0.4 by 0.56 inches.

Which chip does the adapter use and is any driver installation required?

The adapter uses a JM20330 chip and supports hot swapping without needing any driver installation.

What is the maximum data transfer rate supported by the Serial ATA 1.0 specification on this adapter?

The adapter conforms to Serial ATA 1.0 with a maximum transmission speed of 150 MB/s.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.