BONAEVER
BONAEVER 15 Pin SATA Power Extension Cable 1 Male to 5 Female 20-inch
Splits one SATA power connector into five female ports for 2.5" SSDs, 3.5" HDDs and optical drives using 20-inch 18 AWG cable
- ColorBlack
- Adds five SATA power ports from one PSU connector with 1-to-5 splitter design
- Reaches drives across the case with 20-inch total cable length
- Supports 2.5-inch SSDs, 3.5-inch HDDs and optical drives via standard 15-pin SATA power
- Delivers 3.3 V, 5 V and 12 V without voltage drop using 18 AWG tin-coated copper
- Simple plug-in installation — no tools or adapters required for SATA devices
Power splitter for SATA drives
This cable splits a single 15 pin SATA power connector into five female ports so you can run multiple drives from one PSU lead. It supports 2.5 inch SSDs, 3.5 inch HDDs and optical drives that use a standard SATA power socket.
Length and gauge limits
The total reach is 20 inches with the first branch at 8 inches and the remaining four at 3 inches each. The 18 AWG tin coated copper conductors carry 3.3 V, 5 V and 12 V without voltage drop across the 52 cm assembly.
Check your PSU and device ports
Verify that your power supply has a free 15 pin SATA plug and that every drive you plan to connect uses a matching SATA power input. The adapter is not compatible with other port types and incorrect connection can damage components.
Highlights
- Adds five SATA power ports from one PSU connector with 1-to-5 splitter design
- Reaches drives across the case with 20-inch total cable length
- Supports 2.5-inch SSDs, 3.5-inch HDDs and optical drives via standard 15-pin SATA power
- Delivers 3.3 V, 5 V and 12 V without voltage drop using 18 AWG tin-coated copper
- Simple plug-in installation — no tools or adapters required for SATA devices
Specifications
| Color | Black |
|---|
Questions about this item
How many SATA power connectors does the 15 pin splitter provide?
The cable has one 15 pin SATA male connector and five 15 pin SATA female connectors, letting you power up to five drives from a single PSU lead.
What does the 20 inch total length mean for drive placement?
The 20 inch length is split into an 8 inch lead to the first female connector followed by four 3 inch gaps, so drives must be mounted close together in the same bay area.
What does the 18 AWG rating tell me about power delivery?
The 18 AWG tin coated copper wire supports 3.3 V, 5 V and 12 V rails without performance loss, matching the standard SATA power specification for SSDs, HDDs and optical drives.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



