We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bolton Technical M12 A-Code 8-pin female connector to flying leads cable 10m

Bolton Technical

Bolton Technical M12 A-Code 8-pin Female to Flying Leads Cable 10m

SKU CH-PNCD-EVKVZ

M12 A-Code 8-pin female connector to flying leads cable, 10 m length with waterproof PVC overmould and shockproof locking

  • Reliable signal transmission for industrial sensors and actuators
  • Secure M12 A-code 8-pin female connector with shockproof lock
  • Waterproof PVC overmould protects against moisture and debris
  • 10 m / 33 ft cable length suits extended runs
  • Open flying leads allow direct termination to fieldbus modules

Industrial Sensor Connectivity

The Bolton Technical M12 A-Code cable provides an 8-pin female connector to flying leads for industrial sensor and actuator installations. It carries signals for IO Link fieldbus modules and factory automation equipment over a 10m run. The waterproof PVC overmould and threaded lock suit harsh environments. Buyers needing a pre-terminated male plug or a different pin count cannot use this item.

Replaces Damaged Field Wiring

This assembly replaces a failed sensor cable or upgrades a temporary flying-lead splice to a sealed, shielded connection. The jump is worth it when machine downtime costs exceed the cable price and a 33ft reach matches the routing path. Installations requiring shorter or longer runs must specify a custom length before ordering.

M12 A-Code Physical Limits

The A-coded 8-pin interface defines the keying and signal arrangement; it does not carry high-power loads or multi-gigabit Ethernet. Shielding reduces noise on the 10m span, yet voltage drop and signal timing depend on the connected device and cable resistance. Users must verify their module pin-out matches the open leads before wiring.

Highlights

  • Reliable signal transmission for industrial sensors and actuators
  • Secure M12 A-code 8-pin female connector with shockproof lock
  • Waterproof PVC overmould protects against moisture and debris
  • 10 m / 33 ft cable length suits extended runs
  • Open flying leads allow direct termination to fieldbus modules

Specifications

No published specifications for this item yet.

Questions about this item

What diameter panel cut-out does the M12 A-Code 8-pin female connector need for bulkhead mounting?

The connector uses a standard M12 thread, so a 12 mm clearance hole is required for panel mounting.

Which wire colour matches which pin when terminating the flying leads on this 10 m cable?

Strip the PVC jacket, then match each lead to the pin-out printed on the connector body — pin 1 to pin 8 — before crimping or soldering.

How often should the waterproof overmould and shield be inspected on a 10 m industrial run?

Check the overmould and shield integrity every 12 months or after any severe vibration event to maintain ingress protection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.