We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow armored duplex fiber patch cord with LC UPC connectors on a coiled reel

Bolton Technical

Bolton Technical Armored Fiber Optic Patch Cord LC UPC Duplex 9/125um 100m/330ft 2 in 1 accessory

SKU CH-40DD-NMT5W

Armored duplex singlemode patch cord with LC UPC connectors, 100 m length, sub-0.30 dB insertion loss and 50 dB return loss

  • Reliable signal transmission with insertion loss under .30 dB and return loss above 50 dB
  • Durable armored design withstands over 1000 mating cycles and bends to .8 inch radius
  • Singlemode 9/125 µm fiber supports 100 m or 330 ft duplex connections
  • Operates from -40 to 80 °C for indoor and outdoor deployment
  • Simple installation requires few special tools and allows easy reuse

Armored Duplex Patch Cord

This Bolton Technical cable is a 100 metre duplex singlemode fiber patch cord with LC UPC connectors on both ends. It suits installers and network engineers who need a rugged link for indoor or outdoor runs. The armored jacket protects the 9/125 µm fibers from crush and rodent damage. It arrives new and ready for immediate termination.

Sustained Environmental Performance

The cord operates continuously from minus 40 to plus 80 centigrade and resists sun, rain, dust and high humidity. Insertion loss stays below 0.30 dB and return loss exceeds 50 dB across the full length. A minimum bend radius of 0.8 inch prevents signal degradation on tight routes. Durability is rated for more than 1000 mating cycles.

Pre-Installation Checks

Verify that both endpoints use LC UPC interfaces and accept 9/125 µm singlemode fiber. Confirm the 100 metre length matches your route plan with slack for management. Ensure the armored diameter fits your conduit or tray space. No special tools are required, but clean the ferrule end faces before mating.

Highlights

  • Reliable signal transmission with insertion loss under .30 dB and return loss above 50 dB
  • Durable armored design withstands over 1000 mating cycles and bends to .8 inch radius
  • Singlemode 9/125 µm fiber supports 100 m or 330 ft duplex connections
  • Operates from -40 to 80 °C for indoor and outdoor deployment
  • Simple installation requires few special tools and allows easy reuse

Specifications

No published specifications for this item yet.

Questions about this item

Does the armored jacket keep the cord from overheating in a -40 to 80 °C cabinet?

The cable is rated for -40 to 80 °C operation and has no active components, so it produces no heat of its own; the armor simply protects the fiber in those extremes.

What connectors must my patch panels already have for this duplex LC UPC cord to plug in directly?

Both ends terminate in LC UPC connectors, so each panel needs a matching LC UPC adapter.

Will the 2 cm minimum bend radius let me route this alongside legacy patch cables in a tight tray?

Yes, the 2 cm bend radius is tight enough to follow the same pathways as standard patch cords.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.