Bolton Technical
Bolton Technical 30Pin EDP FHD LCD Flex Cable for Latitude 3540 Quake L15
Replaces the 30-pin EDP FHD display flex cable on Latitude 3540 and Quake L15 models
- 30-pin EDP connector restores FHD video on Latitude 3540 and Quake L15
- Replaces Dell part numbers 0TFGM2, 450.0SF0D.0012 and 450.0SF0D.0002
- Verify model before ordering — similar-looking cables are model-specific
- Photos show the exact cable you receive for direct comparison
- New condition ensures reliable signal transmission for display repair
30-Pin EDP FHD Display Cable
This 30-pin EDP flex cable replaces the internal video link on Dell Latitude 3540 and Quake L15 laptops. It carries a full-HD signal from the system board to the LCD panel. The part matches MPNs 0TFGM2, 450.0SF0D.0012 and 450.0SF0D.0002. Buyers needing a different pin count or a non-FHD panel cannot use this cable.
Installation notes and common issues
The cable routes through the hinge area, so the display bezel and hinge covers must be removed for access. Align the 30-pin connector carefully; forcing it can bend the delicate pins. A frequent problem is ordering by laptop model alone — similar-looking cables exist for other panels, so verify the MPN on the original flex before fitting.
EDP interface practical limits
The embedded DisplayPort link supports the panel’s native FHD resolution and standard refresh rate. Bandwidth is fixed by the 30-pin layout and the host controller, so higher-resolution or higher-refresh panels will not work. Cable length is set by the chassis routing; slack cannot be added for alternative panel positions.
Highlights
- 30-pin EDP connector restores FHD video on Latitude 3540 and Quake L15
- Replaces Dell part numbers 0TFGM2, 450.0SF0D.0012 and 450.0SF0D.0002
- Verify model before ordering — similar-looking cables are model-specific
- Photos show the exact cable you receive for direct comparison
- New condition ensures reliable signal transmission for display repair
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the 30-pin EDP FHD flex cable is working after installing it in my Latitude 3540?
Power on the laptop and confirm the internal display shows a stable FHD image without flicker, lines or colour distortion across the full panel.
What comes in the box and what must I source separately for the 30-pin EDP FHD LCD flex cable replacement?
The package contains the 30-pin EDP FHD LCD flex cable only; you will need to provide any required tools such as screwdrivers and pry tools for the Latitude 3540 disassembly.
Which MPN should I choose — 0TFGM2, 450.0SF0D.0012 or 450.0SF0D.0002 — for my Latitude 3540 or Quake L15?
All three MPNs refer to the same 30-pin EDP FHD flex cable for Latitude 3540 and Quake L15; match the number printed on your original cable to be certain.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



