We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Bolton Technical

Bolton Technical 2 in 1 accessory USB-C KVM switch dual monitor 14-in-1 DisplayLink 4K 60Hz

SKU CH-3SD5-4DC6M

Dual-monitor KVM switch shares one keyboard, mouse and 14-in-1 dock between two USB-C 3.2 laptops at 4K 60 Hz via DisplayLink

  • Manage two computers with one keyboard and mouse
  • Connect two 4K monitors at 60 Hz via DisplayLink
  • 14-port hub adds USB 3.0, Gigabit Ethernet and card slots
  • Requires USB-C 3.2 host port and DisplayLink driver
  • No power delivery; front USB-C is data only

Dual-computer KVM with dual 4K outputs

This Bolton Technical accessory combines a two-port KVM switch and a 14-in-1 docking station. It lets two laptops or MacBooks share one keyboard, one mouse and up to two external displays at 4K 60Hz. A DisplayLink driver must be installed on each host for video to appear.

Suited to fixed dual-monitor desks

Professionals who need to toggle between two USB-C 3.2 hosts on a permanent twin-screen layout will benefit. Users whose laptops lack USB-C 3.2, who require power delivery to charge the host, or who need more than two display outputs should consider a different solution.

USB-C 3.2 host link and peripheral hub

Each computer connects through a single USB-C 3.2 cable that carries data and video. The dock adds two USB-A 3.0 ports, one USB-C data port, gigabit ethernet and SD card slots. Video leaves via HDMI and DisplayPort; cables under one metre supporting HDMI 2.1 and DP 1.4 are recommended for stable 4K 60Hz.

Highlights

  • Manage two computers with one keyboard and mouse
  • Connect two 4K monitors at 60 Hz via DisplayLink
  • 14-port hub adds USB 3.0, Gigabit Ethernet and card slots
  • Requires USB-C 3.2 host port and DisplayLink driver
  • No power delivery; front USB-C is data only

Specifications

No published specifications for this item yet.

Questions about this item

Does my laptop need a USB-C 3.2 port to use this KVM switch?

Yes, the switch requires each computer to have a USB-C 3.2 or higher port; older USB-C versions will not work.

Will my existing DisplayPort 1.4 and HDMI 2.1 cables support the 4K 60Hz output?

Cables certified for DisplayPort 1.4 and HDMI 2.1, kept under one metre, will deliver the full 4K 60Hz signal to both monitors.

How can I confirm the DisplayLink driver is active after I connect everything?

Install the DisplayLink driver on both computers; when the driver is running, both external monitors will show an extended or mirrored desktop and the keyboard and mouse will control the selected system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.