We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Projector lamp module with bare bulb inside plastic housing

Bolton Technical

Bolton Technical 2 in 1 accessory Projector Lamp Bulb ELPLP79 ELPLP80 ELPLP90 PowerLite

SKU CH-Z1ZT-CTRVX

Replacement lamp assembly rated at 245/170 W fits Epson ELPLP79, ELPLP80 and ELPLP90 projectors

  • Replaces original lamp with 245/170W bulb matching manufacturer specs
  • Compatible with ELPLP79, ELPLP80 and ELPLP90 part numbers
  • Fits PowerLite 570, 575, 580, 585, 670, 675W and BrightLink models
  • Easy installation restores brightness for home and classroom projectors
  • 30-day refund and 180-day warranty coverage included

Replacement lamp for Epson projectors

This replacement projector lamp bulb fits Epson PowerLite and BrightLink models using ELPLP79, ELPLP80 or ELPLP90 part numbers. It is built to match the original manufacturer specifications for brightness and image quality. The assembly includes a 245/170W bulb ready for installation. It suits schools, offices and home users needing a direct swap for a worn-out lamp.

Power rating and thermal profile

The lamp operates at a rated 245/170W, matching the power draw of the original module supplied with the projector. No additional cooling or power provision beyond the projector's standard design is required. Normal use follows the thermal and acoustic behaviour already engineered into the host projector. The unit is designed to replace the original lamp without altering the projector's noise or heat characteristics.

Installation and compatibility notes

The bulb assembly is designed for straightforward replacement in the listed Epson PowerLite and BrightLink projectors. It covers models including the 570, 575, 580, 585, 590, 595, 670, 675, 680, 1420 and 1430 series. Buyers whose projectors use a different lamp code or who require a higher-wattage module for a larger venue projector will need a different part.

Highlights

  • Replaces original lamp with 245/170W bulb matching manufacturer specs
  • Compatible with ELPLP79, ELPLP80 and ELPLP90 part numbers
  • Fits PowerLite 570, 575, 580, 585, 670, 675W and BrightLink models
  • Easy installation restores brightness for home and classroom projectors
  • 30-day refund and 180-day warranty coverage included

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 245/170W lamp assembly into my Epson PowerLite 585W, and what step is often missed?

Power off and unplug the projector, wait for it to cool, remove the lamp cover screw, pull out the old module by its handle, insert the new ELPLP79 assembly until it clicks, replace the cover screw, then reset the lamp timer in the menu — skipping the timer reset is the step most people forget.

What maintenance or replacement will the ELPLP80 bulb need after extended use?

The 245/170W bulb is rated for typical projector lamp life; when brightness drops noticeably or the replacement warning appears, replace the entire lamp module — no separate filter or component service is required for this assembly.

What limit appears first during long presentations with the ELPLP90 installed in a BrightLink 680Wi?

Sustained operation at 245W causes the lamp housing to reach its thermal limit first, triggering the projector’s automatic dimming or shutdown to protect the bulb and internal components.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.