We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 6.5ft braided headphone cable with a 4-pin XLR connector, vertical-striped PVC jacket and gold-plated plugs

Bolton Technical

Bolton Technical 2 in 1 accessory 4PIN-XLR balanced cable 6.5ft

SKU CH-9YGK-T358N

Balanced headphone cable with 4-pin XLR plug, 6.5 ft length, oxygen-free copper core, gold-plated connectors, compatible with Sennheiser and Audio-Technica models

  • Balanced 4PIN-XLR connection delivers clean audio using 5N LC-OFC copper core
  • 5 ft cable length gives flexible placement for desktop or studio setups
  • High-elastic PVC jacket with striped texture resists wear and corrosion
  • Gold-plated pure copper plugs ensure stable stereo and 7.1 surround signal
  • Twist-lock design keeps connector secure during extended listening sessions

Compatible Headphone Models

This balanced cable fits Sennheiser HD599SE HD598 HD598CS HD598SR HD599 HD569 HD579 HD518 HD518SR HD558 HD560S and Audio-Technica ATH-M40x ATH-M50x ATH-M60x ATH-M70x headphones. It replaces the stock lead with a 4PIN-XLR connection for balanced audio sources. Buyers whose headphones use a different connector or proprietary lock will need a different cable.

Cable Construction and Length

The wire uses 5N LC-OFC copper strands (30*0.06mm) inside a 3.5mm outer diameter high-elastic PVC jacket with a vertical striped texture. Gold-plated pure copper plugs and a twist-lock design keep the connection steady. Total length is 6.5ft (2m). No active electronics or signal processing are present in the cable itself.

Included Accessories

The package contains the balanced cable only; the headset is not included. The cable terminates in a 4PIN-XLR plug and a 2.5mm balanced headphone jack, enabling direct connection to compatible balanced amplifiers or DACs. No adapters, carrying case or software are bundled.

Highlights

  • Balanced 4PIN-XLR connection delivers clean audio using 5N LC-OFC copper core
  • 5 ft cable length gives flexible placement for desktop or studio setups
  • High-elastic PVC jacket with striped texture resists wear and corrosion
  • Gold-plated pure copper plugs ensure stable stereo and 7.1 surround signal
  • Twist-lock design keeps connector secure during extended listening sessions

Specifications

No published specifications for this item yet.

Questions about this item

How do I attach the 4PIN-XLR plug to my HD599SE without loosening it?

Align the twist-lock collar with the headphone socket, push straight in until it clicks, then rotate the collar clockwise until it stops — forcing it sideways bends the 30×0.06 mm LC-OFC strands inside the 3.5 mm jacket.

When should I replace the PVC jacket on this 6.5 ft balanced cable?

Replace it once the vertical stripes wear smooth or the jacket cracks near the 2.5 mm headphone plug; the oxygen-free copper core stays conductive, but exposed conductors pick up hum and lose the 7.1 surround signal.

What length limit degrades stereo imaging first on this 2 m cable?

The 6.5 ft run is the practical ceiling — beyond it the 30×0.06 mm LC-OFC conductors add enough resistance to unbalance the 4PIN-XLR feed and collapse the 7.1 soundstage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.