We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6 ethernet cable, 150 ft, snagless moulded boots

BlueDiamond

BlueDiamond Cat6 network ethernet cable 150ft White

SKU CH-N7YA-1GJ9P

Category 6 UTP patch cable rated to 550 MHz with snagless moulded boots, 150 ft length, EIA/TIA-568A wired for 10/100/1000Base-T

  • Category 6 compliant for 10/100/1000Base-T networks
  • Rated to 550Mhz bandwidth for high-speed data
  • Snagless moulded boots prevent breakage during installation
  • 350Mhz stranded 4-pair UTP construction ensures signal integrity
  • CSA & UL approved meeting Draft 11 specification

150 ft Cat6 cable for wired networking

This 150-foot Category 6 patch cable provides a wired Ethernet link rated to 550 MHz. Snagless moulded boots protect the connectors from breakage during routing. The cable uses 350 MHz stranded 4-pair UTP construction with eight conductors. It is CSA and UL approved for safety compliance.

Home and office runs needing 150-foot reach

The length suits installations where devices sit far from the switch or router. Snagless boots help when pulling cable through tight spaces or around corners. Buyers who need a shorter patch lead or a shielded cable for noisy environments should look at something else.

550 MHz bandwidth rating for Category 6

The 550 MHz rating is the single figure that determines whether this cable supports the throughput your network requires. It meets the Draft 11 specification and is wired to EIA/TIA-568A for 10/100/1000Base-T or Token Ring applications.

Highlights

  • Category 6 compliant for 10/100/1000Base-T networks
  • Rated to 550Mhz bandwidth for high-speed data
  • Snagless moulded boots prevent breakage during installation
  • 350Mhz stranded 4-pair UTP construction ensures signal integrity
  • CSA & UL approved meeting Draft 11 specification

Specifications

No published specifications for this item yet.

Questions about this item

What type of Ethernet ports must my router or switch provide for this 150ft Cat6 cable to connect?

The cable is wired to EIA/TIA-568A and supports 10/100/1000Base-T, so any standard Gigabit Ethernet port will work.

Will the 550MHz rating on this cable cause problems if I keep older 100MHz Cat5e patch leads in the same network?

No, the higher 550MHz rating simply means this cable can handle more bandwidth; it interoperates with slower Cat5e links without issues.

How can I verify the 150ft run is performing at its rated 550MHz after installation?

Use a cable certifier that tests to 550MHz and confirms the link passes Category 6 Draft 11 limits for insertion loss, crosstalk and return loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Network Ethernet Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.