We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue CAT5e Ethernet patch cable 35ft with snagless boots

BlueDiamond

BlueDiamond CAT5e Patch Cable 35ft Blue

SKU CH-Z5YC-74X41

35-foot snagless UTP patch cable rated at 350 MHz with EIA/TIA-568A wiring for 10Base-T networks

  • Snagless moulded boots protect the connector from breakage
  • 350 MHz bandwidth supports 10Base-T and Token Ring networks
  • 35 ft length gives flexible reach for desk or rack runs
  • EIA/TIA-568A wiring ensures correct pin-out for standard Ethernet
  • CSA and UL approvals confirm safety and performance compliance

What this cable is and who it suits

This BlueDiamond CAT5e patch cable measures 35ft and uses snagless moulded boots to protect the connectors from breakage. It is built with 350Mhz stranded 4-pair 8-conductor UTP construction and wired to the 568A standard. The cable serves home or office networks that run 10Base-T or Token Ring links.

Practical limits of the CAT5e standard

The cable meets the Draft 11 specification and carries CSA and UL approvals for safety compliance. Its 350Mhz bandwidth supports the rated 10Base-T throughput but does not extend to higher-grade categories. Installers should match the 568A pinout at both ends to maintain correct operation.

Installation notes and common pitfalls

Snagless boots make routing through tight spaces easier while reducing the chance of tab damage during pulls. The stranded conductors tolerate repeated flexing better than solid-core alternatives. Verify that both endpoints use 568A wiring; mixing with 568B will cause a crossover fault.

Highlights

  • Snagless moulded boots protect the connector from breakage
  • 350 MHz bandwidth supports 10Base-T and Token Ring networks
  • 35 ft length gives flexible reach for desk or rack runs
  • EIA/TIA-568A wiring ensures correct pin-out for standard Ethernet
  • CSA and UL approvals confirm safety and performance compliance

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick this 35 ft length or a shorter run for my desk-to-router link?

Choose the 35 ft cable when the distance between devices is close to that length; excess slack can be coiled, but a shorter run reduces clutter and potential signal loss.

What does the 350 MHz rating mean for everyday 10Base-T traffic?

The 350 MHz bandwidth provides ample headroom for 10 Mbps Ethernet, so the link will run at full speed without the cable being the bottleneck.

Is the 568A wiring compatible with standard Gigabit switches?

The cable is wired to EIA/TIA-568A, which works for 10Base-T and Token Ring; Gigabit Ethernet typically expects 568B pin-out, so verify your equipment’s wiring standard before relying on it for 1 Gbps links.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Network Ethernet Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.