Bluedee SK010 Black 2.0 Soundbar 15 W Bluetooth 5.0 3.5 mm USB-C Powered
A compact 2.0 soundbar delivering 15 W stereo sound via Bluetooth 5.0 or 3.5 mm aux with USB-C power and touch controls
- TypeSoundbar
- ColorBlack
- Configuration2.0
- Connector TypeBluetooth
- Total Power15 watts
- Satellite RMS Power /ea15 watts
- Hi-Fi stereo sound from dual drivers and diaphragms
- Bluetooth 5.0 and 3.5 mm aux give two ways to connect
- USB-C powered at 5 volts for plug-and-play simplicity
- Compact 16.45 in soundbar fits under a monitor
- Touch controls and braided Y-cable keep the desk tidy
Compact Soundbar for Desktop Audio
The Bluedee SK010 Black is a 2.0 channel soundbar designed for desktop PCs and laptops. It connects via Bluetooth 5.0 or a 3.5 mm auxiliary input. The unit draws power from any 5 V USB or USB-C port for driver-free operation.
Thermal Noise and Power Profile
Passive cooling keeps the speaker completely silent when idle or playing audio. Total output is rated at 15 watts RMS across both channels at 4 ohms impedance. Power consumption stays within standard USB 5 V limits.
15 W RMS Output Decides Suitability
The 15 watt RMS rating determines if this soundbar meets your volume and clarity needs for near-field listening. Buyers needing higher output for larger rooms or reference monitoring will require a more powerful system.
Highlights
- Hi-Fi stereo sound from dual drivers and diaphragms
- Bluetooth 5.0 and 3.5 mm aux give two ways to connect
- USB-C powered at 5 volts for plug-and-play simplicity
- Compact 16.45 in soundbar fits under a monitor
- Touch controls and braided Y-cable keep the desk tidy
Specifications
| Brand | Bluedee |
|---|---|
| Model | SK010 Black |
| Part Number | BD-SK010 |
| Type | Soundbar |
| Color | Black |
| Configuration | 2.0 |
| Connector Type | Bluetooth |
| Total Power | 15 watts |
| Satellite RMS Power /ea | 15 watts |
| Driver | dynamic_driver |
| Frequency Response | 20 KHz |
| Impedance | 4 ohm |
| Signal to Noise Ratio(SNR) | 70 decibels |
| Power Supply | 5 volts |
| Remote | touch |
| Dimension | 2.67 in x 16.45 in x 2.67 in |
| Weight | 0.989 kilograms |
| Package Contents | User Manual |
Questions about this item
How do I install the Bluedee SK010 soundbar and which cable step do people often miss?
Connect the single nylon-braided Y-cable to a USB-A port for power and the 3.5 mm plug to the audio output; the mistake is plugging only the USB end and leaving the 3.5 mm jack disconnected when using wired mode.
What maintenance or replacement will the Bluedee SK010 need later?
The dynamic drivers are sealed and require no user-serviceable parts; only occasional dusting of the grille and checking the Y-cable for wear are needed.
What limit appears first during sustained use of the Bluedee SK010?
At 15 W total power and 4 Ω impedance, the amplifier reaches its thermal ceiling before the drivers hit excursion limits during extended high-volume playback.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Cables To Go 39908 5 in Wall Mount Speaker 70V
- Consumer Electronics
LG Electronics SQC4R-CR 4.1 Channel Wireless Subwoofer Speaker Kit
- Kit



