We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bluecctv 2.1mm DC male plug to two screw terminals pigtail adapter

Bluecctv

Bluecctv BL-PIGTAIL-M 2.1mm DC plug to screw terminal surveillance accessory

SKU CH-B88H-7KS7P

Connects a 2.1mm DC camera input to 18/2 power cable via screw terminals for CCTV installs

  • Converts camera power input to 18/2 cable via 2.1mm plug
  • Screw terminals secure 18/2 power cable without soldering
  • Female DC plug fits standard 2.1mm camera power inputs
  • Compatible with RG59 Siamese cable used in CCTV installs
  • Simple two-pin design speeds up installer wiring tasks

Purpose-built adapter for CCTV installs

The BL-PIGTAIL-M bridges a standard 2.1mm camera input and bare 18/2 power cable, letting technicians terminate power leads without soldering. It targets security installers who need a reliable, tool-only connection on site.

Screw-terminal constraint for solid or stranded wire

The two-pin terminal block accepts the conductors from RG59 Siamese cable or equivalent 18/2 pair, but it cannot carry heavier gauge wire or higher current loads beyond what the 2.1mm barrel standard permits. Polarity must be observed manually because the plug housing is not keyed.

Compact moulded body with strain relief

The plastic overmould protects the solder joints and provides a grip point when mating or unmating the 2.1mm jack, reducing cable fatigue at the camera end. No mounting holes or DIN clips are present, so the adapter hangs inline and must be secured with ties or tape in permanent runs.

Highlights

  • Converts camera power input to 18/2 cable via 2.1mm plug
  • Screw terminals secure 18/2 power cable without soldering
  • Female DC plug fits standard 2.1mm camera power inputs
  • Compatible with RG59 Siamese cable used in CCTV installs
  • Simple two-pin design speeds up installer wiring tasks

Specifications

BrandBluecctv
ModelBL-PIGTAIL-M

Questions about this item

Should I pick the BL-PIGTAIL-M or a different adapter for my 18/2 power cable?

The BL-PIGTAIL-M is made for 18/2 power cable and has screw terminals that secure each conductor.

What does the 2.1mm figure mean when I plug this into my camera?

It matches the standard 2.1mm male power input found on most IP and CCTV cameras.

Does the screw-terminal side limit the wire gauge I can use?

The terminals accept the conductors from typical 18/2 cable used with RG59 Siamese runs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.