We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal enclosure with nine fused output terminals and a power switch

Bluecctv

Bluecctv BL-1210 12 V 10 A 9-channel fused power supply

SKU CH-TFFM-6B52M MPN BL-1210

Distributes 12 V DC across nine individually fused outputs with a 10 A total capacity and UL listing

  • 9 fused outputs protect each camera circuit
  • 10 A total capacity powers multiple 12 V devices
  • UL and CUL listed for safety compliance
  • 110–220 V AC input works worldwide
  • LED indicator and power switch simplify operation

12 V 10 A CCTV power distribution

The Bluecctv BL-1210 delivers 12 VDC through nine individually fused outputs. It accepts 110–220 VAC at 60 Hz and includes an AC power switch with a power LED indicator. A power cord is supplied. The unit is UL and CUL listed for safety compliance.

Sustained 10 A supply across nine channels

The unit provides a total of 10 amps at 12 VDC for continuous operation. Each of the nine outputs is protected by a 3.0 amp fuse that limits current during prolonged loads. This arrangement prevents a single fault from disabling the entire system while the supply runs at its rated capacity.

Nine fused outputs at 3.0 amp each

Nine fused outputs set a practical limit of 3.0 amps per channel, so no single camera or accessory can draw more than that without blowing its fuse. The combined draw of all channels must stay within the 10 amp total rating of the supply. Input voltage range and fixed 60 Hz operation define the electrical environment the unit requires.

Highlights

  • 9 fused outputs protect each camera circuit
  • 10 A total capacity powers multiple 12 V devices
  • UL and CUL listed for safety compliance
  • 110–220 V AC input works worldwide
  • LED indicator and power switch simplify operation

Specifications

BrandBluecctv
ModelBL-1210

Questions about this item

Does the 10 A unit run hot or make noise when powering cameras all day?

The BL-1210 has no fan listed in the specifications, so it operates silently; heat will depend on how much of the 10 A load is actually drawn.

What must I already have to connect nine cameras to the BL-1210?

You need nine 12 V DC cameras or accessories, each drawing no more than 3.0 A, plus a 110–220 V AC mains outlet for the supply’s input.

Will the 12 V 3.0 A fused outputs work with older analogue cameras that only specify 12 V?

Yes, any legacy 12 V device that stays within the 3.0 A per-channel fuse limit can be powered from the nine outputs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.