Bluarc Electronics
Bluarc Electronics Multi-Tow 7 Blade 4 Flat Trailer Connector 180-degree lid
Combines 7‑way round and 4‑flat connectors with a 180‑degree weatherproof lid and includes mounting hardware
- FeaturesNickel Coated Terminals, Stainless Steel Hardware
- Height4 Inches
- Width3 Inches
- Length4 Inches
- Weight10.5 Ounces
- Fitment7 Way Round, 4 Flat, USCAR
- Multi-Tow design powers 7-blade RV and 4-flat trailer lights from one connector
- 180-degree lid opening with oversized hinge seals out moisture and debris
- Nickel-coated terminals and stainless-steel hardware resist corrosion in harsh weather
- Powder-coated mounting bracket and all hardware included for plug-and-play installation
- Replaces Hopkins 40950 for direct OEM fitment on most vehicles
Multi-Tow Connector for RV and Trailer
This Bluarc Electronics connector combines a 7-blade round and a 4-flat plug in one housing. It supplies power and braking for an RV or runs tail lights and turn signals on a trailer. The kit includes a powder-coated mounting bracket and stainless steel hardware for a direct bolt-on fit. Some minor modifications may be needed on certain vehicles.
Weatherproof Lid and Corrosion-Resistant Terminals
A lid that opens 180 degrees on an oversized hinge seals the pins against water and road grime. Nickel-coated terminals and stainless steel fasteners resist corrosion over long service life. The heavy-duty OEM-style connectors are built to handle the electrical load of lighting and brake circuits without overheating.
Included Bracket and Hardware Simplify Installation
The supplied mounting bracket and stainless steel hardware let you secure the unit to a receiver or bumper without sourcing extra parts. Nickel-coated pins maintain low contact resistance so signals stay clean. The package replaces Hopkins 40950 and carries a five-year warranty against defects.
Highlights
- Multi-Tow design powers 7-blade RV and 4-flat trailer lights from one connector
- 180-degree lid opening with oversized hinge seals out moisture and debris
- Nickel-coated terminals and stainless-steel hardware resist corrosion in harsh weather
- Powder-coated mounting bracket and all hardware included for plug-and-play installation
- Replaces Hopkins 40950 for direct OEM fitment on most vehicles
Specifications
| Brand | Blue Arc Electronics |
|---|---|
| Features | Nickel Coated Terminals, Stainless Steel Hardware |
| Height | 4 Inches |
| Width | 3 Inches |
| Length | 4 Inches |
| Weight | 10.5 Ounces |
| Fitment | 7 Way Round, 4 Flat, USCAR |
Questions about this item
How do I install the Bluarc Multi-Tow connector and which step is often missed?
Mount the powder-coated bracket with the included stainless-steel hardware, then plug the OEM connectors into the vehicle harness; the step often missed is tightening the bracket bolts to the specified torque so the 180-degree lid aligns and seals correctly.
What maintenance will the Bluarc Multi-Tow connector need over time?
Inspect the nickel-coated terminals and oversized hinge annually; clean any corrosion with electrical-contact cleaner and apply dielectric grease, and replace the lid gasket if it shows cracking to maintain the weatherproof seal.
What is the first limit I will hit when towing continuously with the Bluarc Multi-Tow connector?
The 180-degree lid hinge is the first component to show wear under sustained vibration and repeated opening cycles; lubricate the hinge pins regularly to prevent binding and premature fatigue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



